Can measure the dynamic viscosity of normal temperature solid high temperature molten fluid, viscosity range 10~ 200000mPa · s, Temperature range RT +~ 250 ℃, repRoducibility +/- 0.5% F. S, support a variety of Rotor speed and timing functions.
Using Dynamic Low Temperature Nitrogen Adsorption Method and High Sensitivity Sensor, the test range from 0.0005m ²/g has no upper limit, the repeatability error ≤ +/- 3%, and the single sample test is completed in about 3 minutes.
Measurement accuracy of 0.1 ℃, range of 0~ 100 ℃, real-time display of temperature values, suitable for a variety of Viscometer models, to ensure a stable test environment.
With 18 speed Rotation speed control and 0.3-100 rpm range, automatic calculation range, support user-defined calibrate, Repeatability up to +/- 0.2% F. S, accuracy +/- 1% F. S, can measure 1~ 2000000mPa · s viscosity.
Measurement range 100-13000000cP, equipped with 18 gear Rotation speed control, with automatic range calculation and Self-check function, support user-defined calibrating and 10 language selection.
Measurement range 200-106000000mPa · s, accuracy +/- 1% F. S, support 18-speed Rotation speed control and PT100 temperature sensor, with Self-check function and 10 sets of program storage, can generate Excel data reports.
With 18-speed Rotation speed control and 0.3-100 rpm range, Measurement accuracy of +/- 1% F.S., support for automatic range calculation and user-defined calibrate, easy and reliable operation.
With 2-level accuracy and +/- 2% Indication Error, it supports three test modes of real-time tracking, peak holding and first peak, and can store 99 sets of data and automatically calculate statistical values.
With 1 level accuracy and +/- 1% Indication Error, it supports three test modes of real-time torque tracking, peak holding and first peak, and can store 99 sets of data and automatically calculate statistical values.
With 1 level accuracy and +/- 1% Indication Error, supports automatic conversion of three units and 99 sets of data storage, can set peak hold time and upper and lower limit alarms, equipped with dedicated software for data analytics and Linear dispersion display.
With +/- 2% indication relative error and 0.1N.m resolution, it supports three test modes of real-time tracking, peak holding and first peak, and can set upper and lower limits for comparison and automatically calculate statistical values.
Weighing range 0-310g, Readability 1mg, with four-level shockproof and dynamic temperature compensation functions, support counting, percentage weighing and RS232 interface to connect external devices.
Adapt to a variety of Viscometer use, suitable for factory field applications, real-time printing measurement results, no need to hand copy, easy operation, can save labor time.
The motor is used to drive the top edge to rise, the edge length is 150mm, and the rising rate is 3mm/min, which can accurately test the dynamic anti-cracking performance of the material against the crazing expansion of the substrate, and the operation is light and stable.
Based on the national standard design, the static Coefficient of Friction and the dynamic Coefficient of Friction can be measured simultaneously, with a test accuracy of up to 0.001N, equipped with High Accuracy Sensor and special drive system to ensure smooth operation and accurate results.
