Using diffuse transmission optical path design, optical density Measurement range 0.00-6 OD, light transmitance accuracy +/- 2%, can simultaneously measure light transmitance, absolute optical density, relative optical density and Dot area ratio.
Optical inspection system to improve imagery mass, working distance up to 20mm, support a variety of observation methods, magnification 40X-1000X, to meet different experimental needs.
Width 2cm, optical path 10mm, dimensions 12.5 × 22.5 × 45mm, specially designed for Spectrophotometer matching Cuvette, to ensure Optical inspection detection accuracy.
The width is 3cm, the optical path is 10mm, and the dimensions are 12.5 × 32.5 × 45mm. As a special accessory for Spectrophotometer, it ensures the stability of the optical path and the accuracy of measurement.
2 samples can be measured at the same time, using platinum temperature sensor and digital Optical inspection sensor, temperature control accuracy 0.1 ℃, heating rate 0.1-10 ℃/min, automatic recording of the experimental process.
Equipped with UIS Infinity Optical inspection system, supports phase contrast observation and dark field function, magnification 40X-1600X, uses 6V/20W halogen lamp Kohler lighting, expandable fluorescent and vertical lighting device.
Optical inspection system with infinite distance, equipped with phase contrast condenser and variable light bar, magnification 40X-1600X, support phase contrast objective and brightfield observation, expandable fluorescence and other auxiliary devices.
Frequency of 710 vibrations per minute, mixing in 30 seconds; can handle 0.5 to 20 liters of barrel paint, equipped with safety interlock and height adjustment functions, quiet operation and easy loading.
Elliptical trajectory vertical vibration design, vibration Frequency 660 times/min, maximum load 30KG, equipped with automatic cooling down system to maintain sample temperature stability, closed structure to reduce noise and pollution risk.
The width is 5cm, the optical path is 10mm, and the dimensions are 12.5 × 52.5 × 45mm, which is suitable for the use of Spectrophotometer to ensure Optical inspection detection accuracy.
Using photoelectric detection and microcomputer servo system, high Sensitivity, minimum reading +/- 0.005 °, Repeatability ≤ 0.007 °, low optical rotation samples with measurable transmittance ≥ 10%, no reading error.
The three-in-one optical path design can simultaneously measure the transmittance of blue light at 430nm, purple light at 395nm and visible light, and the test aperture Φ 1mm is suitable for large thickness materials. Real-time dynamic self-Adjustment ensures accurate data.
Equipment Vibration Frequency 660 times/min, maximum load 30KG, elliptical trajectory movement to ensure that the sample test conditions independent equality, equipped with automatic chill down system to maintain temperature stability.
Optical inspection fluorescence method without reference solution, built-in temperature sensor to calibrate data in real time, dual range design covering 0~ 20mg/L and 0~ 200% Saturation, 10 Meters long cable to support deep water or remote installation, polyformaldehyde and stainless steel composite structure to enhance environmental adaptability.
Vibration Frequency 660 times/min, maximum load 30KG, elliptical trajectory motion to ensure that the sample test conditions are independent and equal, equipped with automatic chill down system to maintain temperature stability.
