It can prepare a wet film thickness of 13.7 microns, with a wire-wound design providing stable coating performance. The 9.52 mm diaMeter ensures easy operation, making it suitable for various paint application scenarios.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Wet film thickness 45μm, main Rod diaMeter 10mm, effective application width 600mm, using SUS304 material, Coating Weight, length and surface preparation can be customized, suitable for a variety of Spreader conditions.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Wet film thickness 137.2 μm, coating width 300 mm. The wire-wound structure enables the preparation of uniform coatings on both flat and easily raised substrates, while the two-end hand grip design facilitates even force distribution during operation.
Glass material is conducive to film flatness, size 230 * 340mm, with wire Rod or Film Applicator for scraping operation is more effective.
The equipment adopts scraping method, coating speed 1~ 10m/min, thickness range 0.005-3mm, equipped with automatic deviation correction and tension control to ensure uniform and stable Spreader.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Using 160 * 280mm size, with wire Rod scraping ink to ensure that the film is flat, Glass table is conducive to operation and observation effect.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
Formed design, wet film thickness 30 microns, application width 60 mm, 304 stainless steel material, accuracy of 0.5 microns, suitable for small width Spreader needs.
Using a formed pRoduction process, the wet film thickness is 76 μm, the accuracy is 0.5 μm, and the 304 stainless steel material is used to ensure durability.
The wire-wound process is employed, achieving a wet film thickness of 52.6μm, with a coating width of up to 300mm. A 50mm grip area is provided at both ends for ease of operation, and the stainless steel material ensures durability.
Wet film thickness 2μm, application width 250mm, formed pRoduction process, 304 stainless steel material to ensure durability, no handle design is easy to use matching handle.
The formed design ensures uniform film, the wet film thickness is precisely controlled to 2μm, the application width is 60mm to meet the small area requirements, and the 304 stainless steel material ensures durability and cleaning convenience.
