Disperse emulsification homogeneous mixing under vacuum or pressure environment, processing viscosity up to 10000MPas, Operating temperature 170 ℃, equipped with a variety of sensing systems Measuring temperature, pressure, viscosity and other paraMeters, observing the reaction process through Glass kettle.
The equipment adopts an electric lifting platform and variable frequency speed regulation, with a maximum Vacuum Level of -0.095Mpa to ensure efficient mixing of materials in a vacuum environment; the core component is SUS304 stainless steel, which is durable and easy to clean, and the compact design is suitable for a variety of application scenarios.
The rectangular vacuum Chamber improves space utilization, Vacuum Level up to 133Pa, is equipped with double-decked tempered Glass doors for easy observation, supports program control of heating and vacuum holding time, and improves processing conformity.
The built-in vacuum pump realizes 0~ -80kPa Vacuum Level, the fully transparent vacuum Chamber can hold 12 samples, the program control supports 80 sets of paraMeter storage, and the vacuum cycle operation is automatically completed.
Adopt Rotation Rotation Rotation Noncontact Mixing & dispersing method, Rotation Rotation ratio 1:0.7, Processing capacity up to 700ml, can complete defoaming stirring in a few seconds to a few minutes, No need to clean appliances, Repeatability is high.
Vacuum chuck area of 300 * 400mm, equipped with 150W vacuum pump, aperture 0.8mm to ensure uniform adsorption, improve Spreader accuracy and Stability.
The effective volume utilization rate of rectangular vacuum Chamber is high, each layer can be independently heated and vacuumed to inject nitrogen without interfering with each other, the temperature control accuracy is +/- 1 ℃, the Vacuum Level is 133Pa, and the double-decked tempered Glass door is easy to observe.
With programmed vacuum cycle control, the maximum number of cycles is 99 times, and the drying time is shortened by more than 50% compared with the traditional method; equipped with a digital vacuum Gauge, the control accuracy is +/- 1% to ensure a stable vacuum environment.
The rectangular vacuum Chamber improves space utilization, the stainless steel studio is durable and easy to clean, the Vacuum Level 133Pa ensures efficient handling, double-decked tempered Glass doors are easy to observe, and over-temperature protection enhances safety.
With programmed vacuum cycle control, it can set the range of 50~ 900Pa Vacuum Level, and the drying time is shortened by more than 50%; it adopts digital vacuum Meter automatic control, accuracy +/- 1%, and supports 7 groups of 63-step temperature programming.
The oil pump forced oil inlet device can still operate continuously under low air pressure; equipped with a gas ballast valve to prevent the pump oil from mixing and prolong the service life; the pumping speed is 6L/S, Ultimate vacuum degree is 0.006mbar, and the noise is only 63dB.
Rotation speed up to 3000rpm, line speed up to 33m/s, electric lifting design for easy operation, double-end sealing to ensure vacuum sealing, suitable for viscosity ≤ 25000cps material.
1Mm Vacuum aperture diameter and 18mm hole spacing design, equipped with 176 adsorption holes to ensure that the substrate is flat and fixed, with 150W vacuum pump to achieve stable adsorption effect.
The equipment operates under vacuum or pressure conditions, with a processing viscosity of 10000MPas, Operating temperature of 170 ° C, equipped with anchor type screw scraping wall stirring slurry and high shear homogeneous Mulser, supporting Multi-ParaMeter measurement such as material temperature and pressure.
Made of stainless steel, with a diaMeter of 60mm and a Rod length of 300mm, it is suitable for efficient mixing of medium and low viscosity liquids. Medium and high speed operation provides stable mixing effect.
