Can be connected to Leeb Hardness Tester directly print measurement data, support a variety of surface Measurement range including R10-R50 cylindrical surface and SR10-SR30 sphere, easy data recording.
High Accuracy Stepping Control system, support HR, HB, HV conversion scale, large test space, Built-in Printer and RS-232 interface, suitable for a variety of hardness of materials.
The use of New material has a long life, stable fullness point and correction point, and can measure 0.6-8 mm thickness materials. Hardness value can be converted into Vickers, Rockwell and other standards.
The use of New material has a long life, stable fullness point and correction point, Hardness value can be converted into Vickers Rockwell Brinell, the range is 0-20HW, and the accuracy is 0.5HW, which is suitable for workpieces with a thickness of 0.6-13 mm.
Compact and lightweight, one-handed operation without experience, the test range is equivalent to brinell hardness 25~ 150HB, no need to support the measurement of large workpieces, with MAX Maximum maintenance and average calculation function.
The Che design can be operated with one hand, the test range is equivalent to Brinell 25-135HB, and the measurement can be completed on one side without support. It has the function of extreme value retention and average calculation of 29 sets of data.
Spring loaded indenter point design, measurement range 0-100 scale, weight only 1 pound 2 ounces, can quickly obtain hardness readings in any location, suitable for homogeneous material testing.
Using 0.5-2 μL micro-volume sample detection, the optical path accuracy is 0.001mm, the detection concentration is 50 times that of conventional equipment, and the sample recovery and 6-second rapid analysis are supported.
Imported special steel pressure needle, Hardness and long life, range 0-20HW, can directly read the Hardness value, suitable for on-site rapid testing, Stability and portability.
Glass sensitive film of 4.5 mm and point ceramic liquid junction, suitable for micro sample measurement, Operating temperature range 0~ 80 ℃, providing stable reference potential.
Impact energy 11mJ, Impact device mass 50g, ball head diaMeter 3mm, Hardness measurement hole or cylinder, suitable for a variety of metal hardness of materials testing.
Maximum range 500g, accuracy 20mg, metal beam thickened design, scale engraving is clear and not easy to abrasion, and the bottom is equipped with horizontal adjustment screws to ensure stability.
Adopt scale differential head adjustment, Graduation 10μm, film thickness 0~ 5000μm adjustable, accuracy +/- 2μm, Drawdown blade straightness +/- 2μm, die steel material wear and corrosion resistance.
The XY axis displacement platform and the lifting measurement platform are used to facilitate accurate fine-tuning and measurement of small samples such as O-rings; the servo system imported from Japan ensures accurate positioning, and the built-in micro printer supports data output.
It adopts 45 ° fixed angle design, loads 1000g +/- 10g, and evaluates Hardness by scratching coatings with different Hardness pencils, which is easy to operate and accurate.
