The centrifugal fan with low energy consumption and reasonable air duct design is used to achieve uniform and stable airflow; the average wind speed is 0.25 to 0.45m/s, and the noise is less than or equal to 62dB (A); it is equipped with initial effect and effective Filter to meet the requirements of purification level.
The quasi-closed Glass damper prevents external air flow from penetrating, the dual-gear adjustable air volume system maintains the wind speed of 0.3~ 0.6m/s, the 304 stainless steel countertop is resistant to corrosion and easy to clean, and the purification efficiency reaches 100 levels.
The quasi-closed Glass damper prevents external air flow from penetrating, the two-speed adjustable air volume system maintains the wind speed of 0.3~ 0.6m/s, the 304 stainless steel integrated molding experimental area is resistant to corrosion and easy to clean, and the cleanliness level reaches 100.
Hall flow rate swirl/spin Sensor, can measure pollution turbid water flow, speed range 0.01-5 m/s, flow measurement error ≤ 1.5%, support -10 ℃ to 50 ℃ environment temperature work, simple and lightweight structure and low power consumption.
Adopting a low-energy centrifugal fan and a reasonable air duct design, the airflow is uniform and stable; the average wind speed is 0.25 to 0.45m/s, and the noise is less than or equal to 62dB (A); the mirror stainless steel countertop is corrosion-resistant and easy to clean, and the standard initial effect and effective Filter meet the purification level.
Velocity range 0.01-5 m/s, flow measurement error ≤ 1.5%, support sewage environment test, simple and lightweight structure, Degree of automation is high, stable and reliable.
Vertical unidirectional flow design prevents external gas from penetrating, with a cleanliness level of 100, an adjustable average wind speed of 0.3 to 0.6m/s, and a noise of less than 60dB, making it easy to operate and corrosion-resistant.
Velocity range 0.01-10 m/s, flow measurement error ≤ 1.5%, using measuring Rod positioning measurement method, lightweight structure and support automatic calculation of flow rate formula.
The quasi-closed Glass damper prevents external air flow from penetrating, the dual-gear adjustable air volume system maintains a stable air speed, the 304 stainless steel countertop is resistant to corrosion and easy to clean, and the embedded Glass is convenient for observing the experimental process.
Adopting a low-energy centrifugal fan and a reasonable air duct design, the airflow is uniform and stable; it is equipped with an initial effect and an effective filter to meet the requirements of the purification level; the average wind speed is 0.25 to 0.45m/s, and the noise is less than or equal to 62dB (A), making it convenient and efficient to operate.
Adopt adsorption drying principle, dewpoint temperature can be reduced to -20 ℃, Flow rate loss control within 10%, effectively prevent oil and gas condensation, ensure the normal operation of pneumatic equipment.
Made of stainless steel, with a flow hole diaMeter of 3.0 +/- 0.01mm and a viscosity range of 7-40mm ²/s, it is suitable for testing the outflow time of Newtonian or near-Newtonian liquids and meets ISO and GB standards.
Measurement range 0~ 1000ml/min, pressure difference 0.1~ 2.0kpa, stainless steel end cap and pure copper valve anti-corrosion structure, built-in fixture to avoid rubber pad peeling, suitable for a variety of materials Air Permeability accurate test.
Quasi-closed Glass damper to prevent external air penetration, two-speed adjustable air volume system to ensure the working wind speed of 0.3~ 0.6m/s, 304 stainless steel experimental area corrosion resistance easy to clean, equipped with independent five-hole socket.
Quasi-closed Glass damper to prevent external air penetration, dual-gear adjustable air volume system to ensure wind speed 0.3~ 0.6m/s, 304 stainless steel countertop corrosion resistance easy to clean, LED LCD panel real-time monitoring of wind speed.
