Adopt servo electric printing pressure system, printing pressure 0-4mm automatic adjustment, printing speed 0-100 Meters can be set, support low accuracy overprint, simulate Gravure Printing drawdown blade Installation method, easy to detect inks.
The printing speed is 0~ 260m/min, the accuracy is less than 0.5, which supports data management and characteristic detection, and can reduce the number of proofing and material waste.
Automatic ink running stability, ink time and speed can be set, printing pressure 0~ 2mm adjustable, provide low, medium and high three printing speed, each time can be proofed 4 colors to facilitate Color contrast.
The printing pressure can be adjusted accurately according to the thickness of the material, and the printing speed can be adjusted. It provides 4 primary color areas and 4 light color areas to ensure that the pattern is clear and tidy.
Adapt to a variety of Viscometer use, suitable for factory field applications, real-time printing measurement results, no need to hand copy, easy operation, can save labor time.
Wet film thickness 4μm, application width 300mm, formed pRoduction process, 304 stainless steel material to ensure durability and accurate Spreader effect.
Measurement range 3μg to 150mg, quick results in one minute, automatic electrolysis current control and thermal printing function.
It can be used with a full range of Viscometers, supports printing test data and Linear dispersion, and realizes data recording and output functions.
The equipment supports 0-2MM pressure adjustment, providing three-speed printing speed (10/15/20 rpm) and uniform ink speed (650/800/1000rpm), which can imprint 2.5mm thick paper and 1mm plastic film to achieve precise uniform ink and stable operation.
Using magnetic Induction and eddy Current dual principle, Measurement range 0-1500μm, support continuous single two Measurement mode, with 500 sets of data storage and thermal printing function, the error is only +/- 3%.
Using 220LPI line number stainless steel anilox roller, printing surface width 70mm, mesh shape is quadrilateral pyramid, wet film thickness is inversely proportional to the number of lines, suitable for proofing of different inks.
Using thermal printing technology, it is designed for use with testing instruments. It can directly connect the color difference Meter and Glossmeter to achieve real-time output of measurement data and report generation.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Formed design Coating Weight is about twice the wide-wound drawdown bar, wet film thickness 13μm, film accuracy of 0.5 micron, 304 stainless steel material to ensure durability.
With four adjustable friction Frequency 21/43/85/106cpm, friction load 20N, support linear reciprocating friction movement, power-off memory function to ensure that paraMeters are not lost, effective analysis of coating adhesion and wear resistance performance.
