Microcrystalline Pottery and porcelain plate surface corrosion resistance and easy to clean, aluminum alloy shell integrated molding, speed range 0-1250rpm stepless speed, Max.stirring Capacity 3L, ND servo motor drive output power 9W.
Probe surface with wear-resistant aluminum alloy, braided cable to adapt to high temperature rough surface, resolution up to 0.1 μm, support split remote measurement, can store 2500 readings.
The device uses 1200-1500lx Illumrination degree, achieves 80x magnification and 0.01mm resolution through scale Microscope, and can measure the maximum aperture of 2mm, suitable for aluminum foil pinholing light transmission observation.
Film thickness 0.5mm, rounded edge design without burr, surface with anti-rust oil, suitable for coating adhesion, hardness, Impact and other performance testing experiments.
Film thickness 0.5mm, rounded edges without burr design, surface with anti-rust oil, suitable for adhesion, hardness, Impact and other paint performance testing experiments.
Measurement range 0.000~ 0.3mg/L, can be 100 measurements, supporting special instruments to achieve fast and accurate water quality aluminum ion detection, including a variety of Reagent solutions.
It can measure the minimum inner diaMeter of 6mm aluminum tube and 8mm thickness profile, Indication Error 0.5HW, using high strength pointer and special steel pressure needle, support Hardness value multi-standard conversion.
Enclosed aluminum silicate Furnace and nickel-chromium-aluminum alloy heating wire are used to reduce volatile gas corrosion; three-sided heating method combined with PID control, Temperature Fluctuation +/- 5%, accurate and stable temperature control.
Thickness 0.5mm fillet edge no burr design, surface with anti-rust oil to prevent oxidation, suitable for adhesion, Hardness, Impact and other coating performance test.
The activated aluminum oxide ball is used as the adsorption medium, which can adsorption water vapor and chemical corrosion harmful gases, and the oil blocking rate is more than 99%.
Three-sided heating method with aluminum silicate Furnace, high thermal efficiency and uniform temperature. PID control combined with K-type Thermocouple, temperature control accuracy +/- 5%, support 0~ 9999 minutes timing and phased heating.
Adopt 3 * 6mm small aperture design, suitable for surface and ultra-small object measurement, Repeatability in the range of 0-100GU up to +/- 0.2GU, support normal and QC mode switching, built-in rechargeable battery life over 48 hours.
With low temperature OLED display, it can still work normally in -40 ℃ environment; equipped with iron-aluminum dual-use Probe, automatically identify the substrate and convert the mode; Measurement speed is as fast as 0.5 seconds, error range +/- 3%.
Using titanium anodic oxidation aluminum material, the filter is stainless steel, the diaMeter of the flow hole is 4.1mm, the viscosity range is 70-370cSt, the Cup mouth is designed with an anti-spill groove, and each Cup is engraved with a unique serial number.
With double-decked anodic oxidation aluminum housing structure, temperature control is achieved by chilling down and heating liquid, suitable for a variety of standard viscosity Cups, hard anodic oxidation aluminum and stainless steel materials to ensure durability.
