The water pRoduction rate reaches 5L/h, the water intake Flow velocity is 0.8L/min, and the RO membrane intelligent anti-scale flushing and automatic domestic circulation system are supported to ensure the stability of ultrapure water quality, which is suitable for a variety of experimental needs.
The principle of thermal radiation is used to keep the liquid temperature below the boiling point and avoid water droplets in the gas. The double condensation cycle design improves the extraction effect of pure water, and the output of pure water reaches 800-1000ml/hour. No heavy metals are detected by flameless atomic absorption analysis.
Light spectrum analysis technology using dual optical path, equipped with pulse xenon arc and LED dual Illuminant, support SCI + SCE simultaneous measurement, Measurement time is less than 4 seconds, with temperature and Humidity calculation compensation function.
Specially designed for sodium ion detection, 250ml standard Encasement, ElectRode measurement accuracy is ensured by adjusting the ionic strength of the solution, suitable for a variety of water quality analysis scenarios.
Dual Light spectrum analysis technology, Wavelength range 360~ 780nm, Support SCI + SCE simultaneous fast measurement, Automatic calibration and Temperature Humidity Compensation to ensure High Accuracy and Stability.
Measurement range 0.5-3000 μm, maximum resolution 0.1μm, support more than 30 image analysis functions, Particle size distribution and morphology analysis.
The principle of thermal radiation is used to keep the liquid phase temperature below the boiling point, avoid boiling water droplets, and achieve complete gas-liquid separation; the output of pure water is 800-1000ml/hour, and the Heating power is 1500-2000W to ensure that no heavy metals are detected.
Polarographic analysis technology, accuracy of +/- 1.0% FS, support automatic temperature compensation 0~ 60 ℃ and salinity compensation, with RS-485 communication interface and 4~ 20mA current output, strong anti-interference ability.
Using composite ElectRode design, equipped with special reference filling solution and calibrating solution, Measurement accuracy is high, BNC interface compatibility is strong, suitable for a variety of water quality analysis scenarios.
The principle of thermal radiation is used to keep the liquid phase temperature below the boiling point, avoid boiling water droplets, and complete gas-liquid separation; the double condensation cycle design improves the extraction efficiency of pure water, the output of pure water reaches 400-500ml/hour, and the Heating power is 800-1000W to ensure that no heavy metals are detected.
Equipped with 18.25MΩ · cm ultra-pure water quality and 100L/H water pRoduction capacity, 7-inch color touchscreen displays three-way water quality and temperature in real time, supports consumables failure reminder and automatic circulation system to ensure stable water quality.
The water pRoduction rate is 10L/h, and the eight-stage purification system includes reverse osmosis (RO) membrane and ultra-pure polishing column, providing 18.25MΩ. cm ultra-pure water quality, supporting multiple water intake modes and intelligent control functions.
The 5.1-inch LCD screen displays three-way water quality and temperature in real time, with regular automatic circulation function to maintain water quality stability, water resistivity > 18.2MΩ · cm, support for consumable life setting and remote monitoring.
CCD camera system to achieve 1280 × 1024 resolution image analysis, support 0~ 180 ° contact angle and 0~ 400mN/m surface tension measurement, with dynamic contact angle analysis and solid surface energy estimation function.
Measurement range 0.00-2 ppm, accuracy +/- 0.10ppm, support CAL CheckTM function verification accuracy, suitable for rapid analysis of fluoride content in drinking water.
