Using 200g weight and 1cm ² bottom area design, in line with GB/T 1728 standard, through the filter paper test method to accurately determine the film surface drying and practical drying time, easy to operate, reliable results.
Using high temperature dry heat technology, temperature control accuracy of +/- 1 ℃, rapid heating and over-temperature protection function, studio volume 70L, easy and safe operation.
Using stainless steel material, bottom area 1cm ², weight 200g, in line with GB/T 1728 standard, can accurately determine the film and putty film surface drying time.
Adopt high temperature dry heat technology, effectively destroy the microbial cell structure through oxidation. Temperature range RT + 10~ 200 ℃, temperature fluctuation is only +/- 1 ℃, with forced convection system to improve heating efficiency, Multiple Safety protection mechanisms to ensure safe operation.
Measure the surface of paint film and putty film and the actual drying time, in line with GB/T1728 standard, the weight of the Tester is 200g, and the weight of the bottom area is 1cm ².
Adopt high temperature dry heat technology, Temperature range RT + 10~ 250 ℃, Input Power 1550W, with High Accuracy Microcomputer LCD display, automatic over-temperature protection and forced convection design, shorten disinfection time.
Using 200 +/- 0.2 g weight and 1 square centiMeter bottom area design, the drying process of the paint film was accurately determined by the cotton ball method to distinguish between surface drying and actual stages in drying.
The use of diamond sanding needles can flatten the surface of the grinding wheel, improve the utilization rate of abrasive wheels, and is equipped with a water supply system to support wet grinding and dry grinding. The size of abrasive wheels is about 250 × 30 × 32mm, and the Rotation speed is 1400rpm.
Temperature uniformity is improved by fan speed control, the independent air duct circulation system automatically discharges water vapor, the dry culture mode is automatically converted, the temperature control accuracy fosters +/- 0.5 ℃, drying +/- 1 ℃, and the double door structure insulation does not affect the temperature in the box.
Adopt fan speed control to improve Temperature uniformity, automatic discharge of water vapor, automatic conversion of dry culture mode, temperature control accuracy of +/- 0.5 ℃, Timer Range 1-9999 minutes.
The friction speed is adjustable from 21 to 106 rpm, and the friction load is 908g or 1810g. It supports a variety of test modes such as dry grinding, wet grinding, and decolorization changes. The automatic shutdown function ensures accurate control of the number of tests.
Measurement range 0~ 500μm, stylus angle 60 degrees, can measure more than 50 readings per minute, with built-in temperature compensation and aluminum oxide wear surface design, in line with ASTM D4417 and other international standards.
With dry grinding and wet grinding dual test function, friction Frequency four-speed adjustable (21/42/85/106cpm), support 0~ 99999 automatic shutdown, in line with JIS-5071-1 and other standard requirements.
Measurement range 0-1000N penetration resistance, detection depth of 30 cm can be extended to 1.5 Meters, without the ring knife method can quickly obtain dry density data, complete the detection within 10 minutes.
With four-speed Adjustable Friction Frequency (21-106cpm), support 2lb/4lb friction load, can complete dry grinding, wet grinding, decolorization changes and other tests to meet a variety of standard requirements.
