Set cross-cut adhesion, film thickness and Buchholz Crowd Hardness three test functions in one, cross-cut knife 6 blade spacing 1mm/2mm, Crowd knife load 500 +/- 5g, using the destruction Measurement principle.
Cedar device weight 1Kg +/- 5g, Cedar load 500 +/- 5g, reading accuracy 0.1mm, in line with international standards, easy and reliable operation.
Using 500 +/- 5g Cedar load and 0.1mm reading accuracy, the surface performance of the material is accurately evaluated by Cedar test, which is easy to operate and meets international standards.
Using 500 +/- 5g Cedar load and 0.1mm reading accuracy, the anti-indentation performance was measured by the reciprocal function of Cedar length, which was stable and easy to operate.
Using 500g Cedar load and 30mm Cedar knife, the length of Cedar is accurately read by 20 times Microscope. The length of Cedar is inversely proportional to Hardness, and the test results can be obtained in 30 seconds with easy operation.
Imported special steel pressure needle, Hardness and long life, range 0-20HW, can directly read the Hardness value, suitable for on-site rapid testing, Stability and portability.
1000 +/- 5g dead weight and 500 +/- 5g payload combined pressure, equipped with 20 times reading Microscope to achieve 0.1mm accuracy measurement, can quantify the anti-indentation performance of coatings and support plastic deformation analysis.
The device adopts destructive measurement, resolution +/- 0.001mm, can carry out V-shaped incision, grid cutting and Cedar test, directly observe Coating thickness and Cedar length, support multi-layer film analysis.
Impact energy 11mJ, Impact device mass 50g, ball head diaMeter 3mm, Hardness measurement hole or cylinder, suitable for a variety of metal hardness of materials testing.
It adopts 45 ° fixed angle design, loads 1000g +/- 10g, and evaluates Hardness by scratching coatings with different Hardness pencils, which is easy to operate and accurate.
Compact and lightweight can be operated with one hand, without support and testing experience, the test range is equivalent to brinell hardness 25~ 150HB, can measure a variety of Hardness scales and has MAX Maximum hold and average calculation functions.
Adopt four-link mechanism to ensure a constant 45 ° test angle, equipped with 500/750/1000g adjustable load, accurately determine film Hardness through different Hardness pencil scratches, meeting standard test Environmental requirements.
The 45 ° fixed angle design is adopted to ensure that the cylindrical pencil lead maintains a constant angle and pressure, the load is 500g, the error is +/- 10g, and the coating Hardness level is determined by the minimum Hardness value pencil trace.
Adopt 45 ° test angle and adjustable load system, the test platform traverse speed 0.5-10 mm/s adjustable, equipped with LCD display real-time monitoring, to meet the needs of accurate coating Hardness detection.
Compact size is only 130 * 76 * 32mm, supports 9 kinds of hardness of materials measurement, can store 50 sets of data and realize six kinds of Hardness standard conversion, equipped with RS232 interface for data communication.
