Measurement range 0.5-3000 μm, maximum resolution 0.1μm, support more than 30 image analysis functions, Particle size distribution and morphology analysis.
Test range 0.5~ 3000μm, Maximum magnification 4000 times, can analyze the number of particles, area, circumference, diaMeter, aspect ratio and other distribution data, support a variety of formats of test report output.
The image method is used to analyze the particle morphology and particle size, the test range is 1~ 3500 μ m, the system magnification is 4000 times, the automatic segmentation success rate exceeds 93%, and paraMeters such as length-diaMeter ratio and sphericity can be counted.
100L/min Sampling flow rate and six particle size channel detection, equipped with long life laser Illuminant and imported air pump, support Touchscreen operation and USB data export function.
With two movements of reciprocating and top-beating vibration, the screening efficiency is high and does not block the screen surface. It can be adapted to a set of screening screens of Φ 200, Φ 75, and Φ 100. The number of swirl/spins is 290 +/- 6 times/minute, and the number of beats is 156 +/- 3 times.
Using 50L/min Sampling flow rate and six particle size channel synchronous detection, equipped with semiconductor laser Illuminant and Touchscreen control, built-in thermal printer supports real-time data output, Continuous Operating Time up to 5 hours.
The use of hardened steel double-channel structure ensures dimensional stability, with a range of 0-100 μm and 10 μm Graduation, the film can be scraped in 3 seconds and the particle distribution can be evaluated.
Rotation speed up to 900rpm, discharge particle size minimum 0.1um, with forward and reverse alternating operation and intermittent grinding function, support vacuum grinding and inert gas protection, more than ten kinds of material grinding Tank to ensure no pollution.
Horizontal operation prevents the sample from sinking to the bottom, and the ground is more uniform; four working stations can handle different materials at the same time; the grinding time only takes 5-10 minutes, and the minimum discharge particle size reaches 0.1 μm; It has a variety of functional modes such as positive and reverse alternating operation, stepless speed regulation, timing, etc.
Using light scattering principle to detect 0.3-10 μ m particle size, Sampling flow rate 28.3L/min, built-in lithium battery supports 6 hours of work, can directly save data to U disk, equipped with thermal printer for on-site output.
With six-channel particle size detection and 2.83L/min Sampling flow rate, using laser Illuminant life of over 30,000 hours, support UCL calculation and Built-in Printer, AC-DC dual-use can work continuously for more than 6 hours.
With 6-channel synchronous detection capability, maximum sampling concentration of 35000 pcs/L, using semiconductor laser Illuminant life of 10 years, built-in battery life of more than 5 hours and support data export printing.
With six-channel particle size detection capability, Sampling flow rate 2.83L/min, using long-life laser Illuminant to ensure Stability, built-in thermal printer and support AC and DC power supply, can work continuously for more than 6 hours.
Modular stainless steel vacuum circuit design ensures high Vacuum Level, metal dewar bottle to maintain constant liquid nitrogen temperature. Equipped with High Accuracy Sensor and 22-bit AD converter, aperture analytical range 3.5 to 5000 Angstroms, support DFT and MC theoretical model calculations.
Explosion-proof enclosure design ensures stable operation in harsh environments, can simultaneously monitor multiple particle size dust concentration without changing the cutter, Measurement range 0.01-100 mg/m ³, built-in protective gas curtain to prevent Optical inspection system contamination.
