The slow-speed design operates in the laminar flow region, and the liquid forms an axial circulation along the helical surface. The pulp sheet has a diaMeter of 50mm and a Rod length of 350mm. It is suitable for mixing medium and high viscosity liquids.
Adapted diaMeter 16mm formed Metering Rod, the total length of 2000mm, through the special structure to correct the straightness of the Rod body, to ensure stable rotation and full contact with the substrate, improve the thickness control accuracy of Spreader.
The slow mixing design operates in the laminar flow area, the liquid forms an axial circulation along the helical surface, the diaMeter of the pulp sheet is 60mm, and the Rod length is 350mm, which is suitable for the treatment of medium and high viscosity media.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
Wet film thickness 45μm, main Rod diaMeter 10mm, effective application width 600mm, using SUS304 material, Coating Weight, length and surface preparation can be customized, suitable for a variety of Spreader conditions.
Using three-phase brushless DC motor to achieve 50-1500rpm stable speed regulation, temperature control accuracy +/- 1 ℃ and with temperature protection function, soft start design to prevent stirrer beating, suitable for long-term unmanned operation.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Equipped with 1 tie Rod and 10 adapters, the specifications cover M6 to M24, and are suitable for a variety of bolt sizes to ensure test compatibility and ease of operation.
With bar and Drawdown blade two Spreader mode, using clamshell Drawdown blade head and new bar Installation method, easy to clean. Spreader speed and length can be freely adjusted, film thickness control accuracy is high, suitable for Glass, cardboard and other substrates.
The formed process ensures that the film is uniform, the film thickness is 118.9μm, the Rod diaMeter is 9.5mm, the total length is 40cm, and the effective application width is 30cm.
The photoelectric counter is used to realize automatic counting, and the measurement is fast and accurate; the period of M-3 swing Rod is 0.625s, and the swing time on standard Glass is 440 +/- 6s; the horizontal mechanism is improved, and the scale can be moved horizontally to facilitate zero adjustment.
Adopt double guide Rod structure to improve Stability, Maximum load 1000N, Support stepless speed regulation and four test modes, Have force holding and tension breaking stop function.
The slow-speed design operates in the laminar flow region, and the liquid forms an axial circulation along the helical surface. The slurry diaMeter is 70mm and the Rod length is 350mm. It is suitable for mixing and heat transfer of medium and high viscosity liquids.
