Measurement range 0-100 ° SR, equipped with a special measuringflask to directly display the Freeness/Schopper-Riegler value, without conversion, the test water temperature is controlled at 20 +/- 0.5 ° C to ensure accurate and reliable detection results.
Measurement range 1~ 100 ° SR, sealing cone rising speed 100 +/- 10mm/s, Pulp suspension filtration rate was determined according to Schopper-Riegler method.
Measurement range 0~ 100 ° SR, cone rising speed 100 +/- 10mm/s, suitable for all kinds of Pulp suspensions, can use raw materials economically and end the Refining process in time, simple and reliable operation.
Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1s, using national standard design, can accurately detect Pulp suspension filtration rate.
Manual compression sealing vertebral body design, three-legged leveling mechanism to ensure sealing, Measurement range 0~ 100 ° SR, cone rising speed 100 +/- 10mm/s, overflow port discharge time 149 +/- 1s.
Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1 seconds, cone rising speed 100 +/- 10mm/s, used to detect Pulp suspension filtration rate, in line with ISO 5267-1 international standards.
Vertical design, motor and drying system separation, small vibration, low noise, high dehydrating efficiency, Rotation speed of 2800 rpm, dehydrating weight 0-500g, accurate timing, easy to use.
Measurement range 0-4mm, resolution 0.001mm, contact pressure 100 +/- 10kPa, contact area 2 +/- 0.05cm ², automatic reciprocating motion to complete thickness measurement.
Measurement range 0-4mm, contact pressure 100kPa, equipped with dial indicator mechanism, can achieve accurate thickness detection, suitable for a variety of sheet materials.
90 degree right angle Probe design for low headroom area operation, Measurement range 0-1500 μm, accuracy of +/- 1%, using stainless steel sealing structure to achieve complete waterproof function.
60 degree projection angle design, Measurement range 0~ 200GU, Repeatability 0.2GU, Support Automatic calibration and a variety of Measurement mode, built-in large-capacity lithium battery can work continuously for more than 12 hours.
Suitable for paper or Cardboard dust degree determination, in line with national standards, the effective area of the table is 0.0625 square Meters and can be 360 ° swirl/spin, and the standard dust map area is 0.05~ 5.0mm ².
Measurement range 0~ 1000ml/min, pressure difference 0.1~ 2.0kpa, stainless steel end cap and pure copper valve anti-corrosion structure, built-in fixture to avoid rubber pad peeling, suitable for a variety of materials Air Permeability accurate test.
90 degree Probe design for narrow space measurement, Measurement range 0~ 1500μm, accuracy +/- 1%, support Data storage and USB transmission, Protection Rating IP65, in line with ISO, ASTM and other international standards.
Using 75 degree Measurement Angles, Measurement range 0~ 300GU, Indication Error +/- 1.2GU, equipped with rechargeable battery with long service life, suitable for low Gloss object surface measurement.
