The 4-sided paint design can be prepared with four different thickness wet-film, application width 75mm, accuracy +/- 3μm, corrosion-resistant stainless steel material, easy to clean and durable.
The single gap design is easy to clean, the four painted surfaces can be prepared with four different thicknesses, the application width is 50mm, the accuracy is +/- 3μm, and the acid and alkali corrosion resistance service life is long.
Made of medical grade stainless steel, Hardness up to HRC55, wet film thickness 75 μm, accuracy control within +/- 2 μm, suitable for a variety of flat surface Spreader applications.
Made of stainless steel, excellent corrosion resistance; provides 500μm fixed wet film thickness and 100mm application width to ensure Spreader uniformity and precise thickness control, suitable for Spreader sample preparation of flat substrates.
High-grade stainless steel material, acid and alkali erosion and durable; 50/100/150/200μm four wet film thickness optional, application width 100mm, suitable for a variety of Coatings and solid substrates, easy to clean.
Made of DAIDO 440C medical grade stainless steel, Hardness reaches HRC55, wet film thickness 125μm, application width 75mm, accuracy +/- 2μm, Spreader can be uniform on flat surface without adjustment.
Using DAIDO 440C medical grade stainless steel material, after sub-zero vacuum hardening to HRC55 Hardness, wet film thickness 100μm, application width 75mm, accuracy control within +/- 2μm, suitable for a variety of smooth plane.
4-Sided design can simultaneously Spreader four different thicknesses, wet film thickness range of 50-200μm, application width 150mm, accuracy of +/- 3μm, stainless steel corrosion resistance easy to clean.
Using DAIDO 440C medical grade stainless steel material, after sub-zero vacuum hardening to HRC55 Hardness, application width 75mm, wet film thickness 50μm, overall accuracy +/- 2μm, suitable for smooth flat surface Spreader operation.
Medical grade stainless steel material, wet film thickness 200μm, accuracy +/- 2μm, suitable for a variety of smooth flat surface, simple operation without adjustment.
Made of DAIDO 440C material, wet film thickness 150μm, application width 75mm, accuracy of +/- 2μm, suitable for a variety of smooth flat surfaces without adjustment.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Hand type easy to operate, load 1000g, standard 6B-6H pencil, suitable for film hardness testing, test temperature 23 +/- 2 ℃ and Humidity 50 +/- 5% environment.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
