According to the Richter Hardness Measurement principle, it can perform High Accuracy detection on all metal materials, support a variety of Hardness standard conversion, Measurement range HLD 170-960, can store 600 sets of data, equipped with true color screen and USB interface.
Hand type easy to operate, load 1000g, standard 6B-6H pencil, suitable for film hardness testing, test temperature 23 +/- 2 ℃ and Humidity 50 +/- 5% environment.
Manual measurement of paint film Hardness, load 500g, test angle 45 °, can be inspected in any direction, three points contact with the measured surface.
Konig and Persoz swing bars are used, Konig swing period is 1.4s, Persoz swing period is 1s, and the number of swing angles is automatically recorded, which is suitable for accurate determination of paint film Hardness.
Manual measurement of paint film Hardness, load 1000g, test angle 45 °, three-point contact with the tested surface design, suitable for inspection in any direction.
Three-point contact design ensures 45 ° stability testing angle, equipped with 6B-6H pencil and 500g to 1000g adjustable load, manual push to achieve accurate film Hardness identification.
Using 320 × 240 color screen display, measurement accuracy of +/- 0.5%, support full angle measurement, can store 10000 data, Built-in Printer is convenient for on-site output, to meet the needs of a variety of hardness of materials testing.
Hand crank type is easy to operate, load 1000g +/- 1g, scratch speed about 1mm/s, test angle 45 °, standard 6B-6H pencil, in line with a number of international standards, through the pencil Hardness grade to accurately evaluate the scratch performance of the paint film.
Using Konig swing Rod, mass 200g, swing period 1.4 +/- 0.02s, can swing 250 +/- 10s on flat Glass, suitable for coating damping test, accurate measurement Hardness change.
Adopt D-type High Accuracy Impact device, support 7 kinds of Impact device automatic identification, can store 600 sets of data, equipped with 320 × 240 true color TFT LCD screen, continuous operation of not less than 150 hours.
Equipped with 200 +/- 0.2g and 500 +/- 0.1g two swing bars, can measure the film damping time, reflect the surface Hardness through swing attenuation, support different standard test requirements.
The three-point contact structure is used to ensure stable sliding, the test angle is fixed at 45 °, and the 500/750/1000g adjustable load is equipped. The coating Hardness is accurately judged by the scratch depth of different Hardness pencils.
It can be equipped with 200 +/- 0.2g and 500g swing Rods, providing 1.4 +/- 0.02s and 1 +/- 0.001s swing cycles respectively, and accurately determines the film Hardness through damping time to adapt to different coating resilience and viscosity characteristics.
Using two-wheel and refill three-point contact structure, refill and test surface to maintain an angle of 45 degrees, equipped with 1000g weight, by pushing the Tester to accurately determine the film Hardness value, easy and reliable operation.
Using two-wheel and refill three-point contact design, refill and test surface to maintain an angle of 45 degrees, equipped with 750g weight load, by pushing the Tester can accurately determine the film Hardness value, easy and reliable operation.
