Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
Adopt small hydraulic force measuring device, drawing force up to 40KN, cylinder Travel 10mm, with a machine multi-purpose, novel structure, compact size, complete functions and other characteristics, high detection accuracy, support strength Mpa and force value KN two Measurement mode.
Maximum displacement value 150mm optional, digital display resolution 0.01mm, Indication Error ≤ +/- 1.5% F. S, powered by lithium battery for up to 400 hours.
Equipped with 15 adapters of different specifications, covering M6 to M39 thread sizes, it can be used with the RJ-30 main engine to achieve pulling force testing of various anchors.
With a 45 ° test angle and an adjustable speed of 5mm/sec, equipped with a 500g weight and a standard pencil set, stable and low-noise electric control is achieved through a stepper motor.
High Accuracy S type sensor accuracy of 0.5%, range 0-10KN, with pull-off automatic stop function, three operation modes optional, can directly enter the test block area display force value and strength value
Rotation speed of 10000rpm is achieved by using 750W three-phase asynchronous motor, and the electric lifting platform supports 300mm Travel, which can handle 10L materials and work continuously for a long time.
Hollow self-resetting hydraulic cylinder design, maximum pull-out force 100kN, Indication Error ≤ +/- 1% F.S; with 240 * 320 color Touchscreen, support automatic data storage and pull-out force-time Linear dispersion display, Storage capacity up to 10000.
Mirror stainless steel liner and electric heating film heating, Temperature Uniformity +/- 1 ℃, heating speed, double-decked door design to reduce heat loss, four corners arc easy to clean.
Adopt low-noise stepless speed regulation motor to automatically load, with a maximum load of 1000N and a speed range of 0-500mm/min. It has the functions of pulling and breaking and stopping, force holding and round-trip movement to ensure accurate and safe testing.
Using 4000W three-phase asynchronous motor, Speed range 0-2800rpm, equipped with a variety of stator heads to adapt to different material viscosity, electric lift Travel up to 700mm, support long-term operation with low temperature rise.
Rotation speed 3000rpm, maximum linear speed 33m/s, high dispersion efficiency, strong material shear force, the formation of uniform suspension effect, safe and convenient operation, electric lifting fast fixed sealing barrel.
Maximum pulling force 30kN, hollow self-reset structure, digital pressure Gauge with automatic calculation and peak holding function, manual pump maximum Operating Pressure 63MPa, compact and portable structure.
Adopt electric lifting system and frequency conversion speed regulation technology, Speed range 60~ 6900rpm, Power 1100W, equipped with dispersed impeller and sand grinding blades, can adapt to different impeller diaMeters, support chilling down water circulation temperature control.
Electric Pump with double oil path plunger, high voltage 63MPa, Measurement accuracy +/- 1.5%, Peak hold and Data storage function, Hollow structure is convenient for anchor cable detection and operation.
