The wet film thickness can be as low as 1.5μm to achieve ultra-thin Spreader; the bottom of the groove is wider, and the Coating Weight is larger; the extrusion process is adopted to avoid the problem of loose wire and broken wire, and it is easy to clean.
Using extrusion process and chrome plating surface, the wet film thickness can be as low as 1.5 μ m, and the groove design is wide to improve the Coating Weight, which solves the problem of traditional steel wire loosening and cleaning difficulties, and realizes stable ultra-thin Spreader.
Using extrusion process and 304 stainless steel material, the minimum wet film thickness can be controlled by 1.5 μm, and the groove design provides greater Coating Weight to avoid wire loosening and clogging problems.
The wet film thickness can be controlled by 1.5μm, the bottom of the groove is wider and the Coating Weight is large, and the extrusion process and chrome plating surface are adopted, which is not easy to loosen the broken wire, easy to clean and not blocked.
Wet film thickness can be as low as 1.5μm, support ultra-thin Spreader; use extrusion process and chrome plating surface to reduce clogging and disconnection problems, groove design to optimize Coating Weight, adapt to a variety of substrate needs.
Linear dispersion of the surface is processed by cold extrusion technology, no risk of steel wire loosening and breaking, wet film thickness 80 µm, diaMeter 16mm, easy to clean and ultra-thin film Spreader.
Using extrusion process and 304 stainless steel material, the wet film thickness can be controlled by 1.5μm, and the bottom of the groove is wider to increase the Coating Weight, so as to avoid the problem of steel wire loosening and blockage.
Using extrusion process and chrome plating surface, the minimum wet film thickness is 1.5μm. The wide groove design improves the Coating Weight, avoids the problem of steel wire loosening and blockage, and is easy to operate.
Using extrusion process and chrome plating surface, the minimum wet film thickness can be controlled by 1.5 μ m, the bottom of the groove is wider and the Coating Weight is large, it is not easy to loosen and break the wire and is easy to clean.
Using cold extrusion processing technology, there is no winding steel wire on the surface to avoid loosening and breaking. Spreader ultra-thin film, wet film thickness 64μm, diaMeter 16mm. Mountain design is easy to clean, reduce bubble mixing, and improve Spreader uniformity.
Using extrusion process and 304 stainless steel material, the minimum wet film thickness is 1.5μm, the groove design is wide to improve the Coating Weight, avoid the problem of loose wire, and the surface chrome plating is easy to clean and maintain.
Using extrusion process and chrome plating surface, the minimum wet film thickness is 1.5μm, and the groove design is wide to improve the Coating Weight, avoid the problem of steel wire loosening and clogging, and facilitate cleaning and shape adjustment.
Linear dispersion formed by cold extrusion processing technology, no risk of wire loosening, Spreader 2 μ m ultra-thin film, smooth surface easy to clean, wet film thickness 100 μ m, diaMeter 16mm to meet the needs of precision Spreader.
Wet film thickness can be controlled 1.5μm, the bottom of the groove is wider Coating Weight is larger, using extrusion process and chrome plating surface, not easy to block and easy to clean.
The minimum wet film thickness can be controlled 1.5μm, using extrusion process and chrome plating surface, not easy to loosen the broken line, easy to clean and not blocked, can be customized specifications length, groove bottom width Coating Weight large.
