The calibrated value is 470mV, the capacity is 500mL, and the tamper-proof sealing design is adopted to ensure that the standard liquid has a valid period of up to 5 years in the unopened state to ensure the accuracy of calibrating.
Four-blade structure design, blade width 70mm, Rod length 300mm, low-speed operation to pRoduce tangential flow, the edge of the formation of high shear rate, effectively prevent media deposition, suitable for high viscosity fluid mixing.
The minimum detection limit of the adapter is 1cP, the operation temperature range is -40 ° C to 250 ° C, the stainless steel material is easy to clean, and the sample dosage is only 18-20mL, which is suitable for low viscosity fluid analysis.
Using 304 wear-resistant stainless steel material, application width 300mm, wet film thickness 18.3μm, suitable for uniform Spreader experiment of various fluid samples.
Using 304 wear-resistant stainless steel material, wet film thickness 18.3μm, Spreader width 300mm, suitable for a variety of fluid samples of experimental film requirements.
Measurement range covers 400~ 1800cst, round head Cup structure ensures fast inspection of various fluid viscosity, correction coefficient 0.95~ 1.05 to ensure data accuracy.
Using Dial display and manual Rotation speed control, Measurement accuracy of +/- 5%, viscosity range of 10 to 2000000mPa · s, support for a variety of rotor specifications and Rotation speed switching, suitable for a variety of fluid Tack test.
The gap wire-wound design, wet film thickness of 228.6 μ m, can reduce high viscosity fluid blockage and eliminate scratches, wide and shallow cavity to promote coating flow and wetting.
Set dispersion and stirring functions in one, Speed range 100-8000rpm, manual lift Travel 250mm, suitable for fluid material experiments, high efficiency and easy cleaning.
The gap wide-wound design, wet film thickness 354.3 μ m, can reduce fluid blockage and scratches, wide and shallow cavity to promote thick coating flow, improve wetting effect.
Wire-wound process is prepared with 6.9 μm wet-film, and the diaMeter of the steel wire is only 0.08mm. If the hair is thin, seamless winding reduces the risk of broken wire, and is suitable for a variety of fluid Spreader applications.
The gap wire-wound structure is adopted, and the wet film thickness reaches 331.5 μm. The thick coating flows more smoothly through the wide and shallow cavity design, which effectively reduces the fluid interruption phenomenon.
The shear rate is 2.0N, the sample volume is only 400 μL, the applicable viscosity range is 125~ 250000mPa · s, and the accuracy is +/- 2% F. S, which is suitable for a variety of fluid tests.
Using gap wire-wound process, wet film thickness of 377.2 μ m, wide and shallow cavity design to promote high viscosity fluid flow, reduce interruption to achieve complete wetting, application width 300mm.
The gap wire-wound structure is used to reduce clogging and scratches, the wide and shallow cavity design improves the thick coating flowability, and the 320 μm wet film thickness supports the uniform Spreader of high viscosity fluid.
