Integrated Incubator and Shaker functions, small footprint and large bottle load; Temperature range 4~ 65 ℃, Temperature Fluctuation +/- 0.2 ℃; 304 stainless steel liner for easy cleaning, quiet operation and support multi-stage programming.
Temperature control accuracy +/- 0.2 ℃, Temperature Uniformity ≤ +/- 0.3 ℃, DC brushless motor drive maintenance-free, with power-off automatic recovery and 0-100 hours timing function, support a variety of module replacement.
Integrated Incubator and Shaker functions, Oscillation Frequency 40~ 300rpm, Temperature range RT + 5~ 65 ℃, 304 stainless steel liner and microcomputer PID control, with UV sterilization and automatic storage setting paraMeters.
Adopt 4mm small diaMeter design, suitable for surface or small area measurement; Repeatability Delta E * ab < 0.05 to ensure Measurement accuracy; Horizontal structure is small in size, comfortable and stable to hold.
Integrated Incubator and Shaker functions, small footprint and large bottle capacity; Microcomputer PID control temperature and Oscillation Frequency, Temperature Fluctuation +/- 0.2 ℃; 304 stainless steel liner is easy to clean, supports multi-stage programming and UV sterilization to ensure safe and efficient operation.
Driven by DC motor, the clamping disc rises and falls rapidly, supports 0-2 hours oscillation time adjustment; with automatic pressure adjustment function to avoid container damage, with 680-710 times/minute Frequency to achieve up and down before and after multi-shake mixing, the main motor Power 750W.
Maximum load 0.5KN, designed for small force test, compact structure, easy operation, ensure test Stability and Repeatability.
Using swirl/spin design, light weight and easy to move, can effectively improve the Measurement accuracy and prevent the instrument from falling, suitable for small workpiece measurement scenarios.
Impact energy 2.7mJ, Impact device mass 75g, small damage to the measured surface, does not damage the hardened layer, suitable for measurement of small and thin parts, the minimum thickness of the specimen is 1mm, and the minimum depth of the hardened layer is 0.2mm.
Maximum load 0.5KN, compact structure, reliable clamping, suitable for a variety of small sample testing, easy to operate.
Adopt small hydraulic force measuring device, drawing force up to 40KN, cylinder Travel 10mm, with a machine multi-purpose, novel structure, compact size, complete functions and other characteristics, high detection accuracy, support strength Mpa and force value KN two Measurement mode.
Support 10-20mL small sample testing, viscosity range 80-40000000mPa · s, equipped with a dedicated rotor for High Accuracy measurement, Thermostatic Bath connection can control the sample temperature.
The equipment can perform continuous rotary drop test, drop height up to 1000mm, Test speed 5-20 times/min, suitable for Reliability verification of small electronic pRoducts.
The measurement aperture is only 1mm, which can accurately measure small or special-shaped surfaces. The repeability is ≤ 0.03, and the accuracy is high. With split design, Probe can flexibly align or invert measurement, and the operation experience is good.
Impact energy is only 2.7mJ, minimal damage to the measured surface, does not damage the hardened layer, suitable for testing 1mm thickness of small parts, Cedar diaMeter minimum 0.32mm.
