The tire size of the instrument is Φ 241 +/- 6mm, weight 15.8 +/- 0.2kg, dedicated to marking Coating drying time test, easy to operate, accurate and reliable results.
The instrument uses 241 +/- 6mm tire uniform rolling detection, wet film thickness 200um +/- 20um, every 30 seconds, repeability test, accurate determination of non-stick tire drying time, suitable for marking Coating quality control.
Provide reference and working standard types, covering signs, markings and raised road signs, with a minimum effective reflective area of 50mm * 50mm, to meet a variety of Color and structural classification requirements.
Measurement range of 0~ 3000mcd · lx-1 · m-2, support drying, humidity and continuous rainfall conditions detection, using silicon diode Detectors and V (lambda) aligners to ensure accurate and reliable data.
Test voltage 100-600V adjustable, short circuit current 1A +/- 0.1A, using rectangular platinum plating ElectRode, drop time interval of 30 +/- 1 seconds, with automatic cut-off protection function.
Using digital High Accuracy dial head, Measurement range 0~ 12mm, Graduation up to 0.01/0 mm, with measurement safety locking mechanism and holding function, easy and reliable operation.
Measurement range is 0~ 1999mcd · lx-1 · m-2, which supports field and laboratory use and meets a number of international and domestic standards.
Measurement range 0~ 12mm, accuracy of 0.01mm, using digital High Accuracy hundred (thousand) sub-Meter head, easy to operate and safe and reliable measurement, in line with GB/T 16311-2009 standard requirements.
The 2850mm sand guide tube and 850μm filtrate net are used to control the falling sand, the calibration funnel can adjust the uniformity of the sand volume, and the sample holder can freely adjust the height and horizontal direction to ensure the Test accuracy and Reliability.
With 0.2 °~ 2.0 ° continuously adjustable observation angle and a variety of incident angle settings, Measurement range 0~ 1999 mcd • lx-1, using silicon diode Detector and standard A Illuminant, to ensure Measurement accuracy consistent with international standards.
The instrument's observation angle is continuously adjustable from 0.2 ° to 2.0 °, the incident angle covers +/- 0 ° to +/- 20 °, and the Measurement range is 0~ 3000 mcd • lx-1. It uses silicon diode Detectors and standard A Illuminants to ensure measurement accuracy.
The radius of the device Impact hammer is 6.4mm, the total mass is 190 +/- 2g, the structure is reasonable, the operation is simple, the applicability is wide, the Measurement accuracy is high and safe, and it meets the requirements of GB/T24725-2009 standard.
With two movements of reciprocating and top-beating vibration, the screening efficiency is high and does not block the screen surface. It can be adapted to a set of screening screens of Φ 200, Φ 75, and Φ 100. The number of swirl/spins is 290 +/- 6 times/minute, and the number of beats is 156 +/- 3 times.
Adopt 45/0 ring lighting structure, equipped with Φ 2/4/8 mm custom diaMeter, chromatic value Repeatability Delta E * ab 0.05 or less, support a variety of Color difference formula and Color space measurement.
Adapted to NS series ColoriMeter, it can measure liquid, sauce and powder samples, realize color data collection of various forms of materials, and expand the application range of the instrument.
