With 200KN test load and 0.1KN Graduation, Sampling rate up to 120Hz, support 99 sets of Data storage and a variety of test modes, including real-time tracking, peak hold, upper and lower limit alarms and automatic shutdown.
Adopt 0.5% F.S. High Accuracy torque Sensor, support bi-directional torque test and 400 sets of Data storage, with locking force and opening force dual Measurement mode and peak hold function, to meet the needs of a variety of Encasement container testing.
Supporting D-type Shore DuroMeter, applying 5kg test force by weight, equipped with Glass bench and adjusting nut to ensure full contact with the sample and improve measurement Stability.
Sampling speed up to 1920HZ, accuracy level 0.5, support three units of automatic conversion and a variety of test mode, with data storage and qualified judgment function, suitable for high-speed Impact torque detection.
With 1 level accuracy and +/- 1% Indication Error, it supports three test modes of real-time torque tracking, peak holding and first peak, and can store 99 sets of data and automatically calculate statistical values.
Electronic Sensor technology implementation 0.5 level accuracy, support three torque units automatic conversion, with peak hold and real-time tracking mode, can store 99 sets of data and automatically calculate statistical values.
Four-channel configuration with K-type Thermocouple, the sampling rate can be adjusted from 1 second to 1 minute, and the thermal insulation performance can last for 60 minutes in a 500 ° C environment to achieve full temperature tracking monitoring.
Can be used with A type or C type Shore DuroMeter, fixed load weight mass 0.75 +/- 0.05kg, hardness Gauge clamping Rod connection size M7x0.5mm, improve hardness testing accuracy and Stability.
Using S-type Sensor structure, Measurement accuracy of +/- 0.5%, with 10 data storage and automatic calculation functions, support for automatic conversion of N/kgf/lbf units, peak hold and automatic release functions can be freely set time.
Using S-type external Sensor, Measurement range 10%~ 100% FS, Indication Error less than +/- 0.5%, with peak hold and automatic unit conversion function, support Data storage and sound and light alarm settings.
The dual-channel interface can connect two Probes at the same time, support K-type -200~ 999.9 ℃ wide range, with low power error-proof system and data locking function, waterproof design to adapt to a variety of environments.
High Accuracy S type sensor accuracy of 0.5%, range 0-10KN, with pull-off automatic stop function, three operation modes optional, can directly enter the test block area display force value and strength value
DC brushless motor, Speed range 30-2200rpm, Max. Torque 60N.cm, can automatically adjust the torque to adapt to viscosity changes, with overload and abnormal automatic protection, support long-term continuous operation.
With 4-channel K-type Thermocouple, Measurement range -100 to 1300 ℃, accuracy +/- 0.3 ℃. Support continuous test 16 times, automatic charging when data is downloaded, and data is not lost after power failure, easy and intuitive operation.
DC brushless motor, Speed range 30-2200rpm, Max. Torque 80N.cm, can automatically adjust torque according to viscosity, support long-term continuous operation, with overload and abnormal automatic protection function.
