The impact height is adjustable from 0 to 100 cm, with optional impactor weights of 1000 g or 2 lbs. It is equipped with a depth control ring and a mold base, supporting ISO 6272 and ASTM D2794 standard tests.
Using external Sensor structure, Measurement range 10%~ 100% FS, Indication Error less than +/- 0.5%, with peak hold, automatic shutdown and RS-232C interface, support Linear dispersion test and machine linkage control.
The device accuracy of +/- 0.5%, the maximum Measured value of 500N, with 10 data storage and automatic calculation of the average function, support for N/kgf/lbf unit automatic conversion, built-in Sensor structure to ensure stable measurement.
Built-in High Accuracy Sensor, Measurement range 10% -100% FS, Indication Error less than +/- 0.5%, Peak hold, Data storage and automatic alarm functions, Support for automatic conversion of various units and PC connection to achieve Linear dispersion test.
The built-in Sensor realizes +/- 0.5% Indication Error, is equipped with 10 sets of Data storage and automatic average calculation functions, supports automatic conversion of N/kgf/lbf units, and can be connected to a computer through RS-232 interface to realize Linear dispersion test.
High Accuracy measurement with 100N Maximum Measured value and 0.05N Graduation, support Data storage and Linear dispersion test function, built-in automatic alarm system and automatic conversion of various units, suitable for various mechanical test scenarios.
It has 0.005N high resolution and +/- 0.5% accuracy, supports 10 data storage and automatic average calculation, and is equipped with RS-232 interface to realize Linear dispersion test and connect the printer to output test report.
High Accuracy Sensor, Indication Error less than +/- 0.5%, Peak Hold, Automatic Unit Conversion and Data storage, Linear dispersion test and machine linkage control.
Measurement accuracy +/- 0.5%, sampling speed 120Hz, support six kinds of units interchangeable freely, with peak hold, Data storage and upper and lower limit alarm function.
Range 1000KN, Graduation 0.5KN, sampling speed 120HZ, support six unit swapping and three test modes, with Data storage, upper and lower limit alarm and mechanical limit protection functions, suitable for a variety of load test scenarios.
With 0.01N high resolution accuracy, can store 10 sets of test data and automatically calculate the average value, support N/kgf/lbf unit automatic conversion, equipped with RS-232 interface to achieve Linear dispersion test and machine linkage control.
With 5000N maximum measurement capability, sampling speed up to 120Hz, support six kinds of unit free conversion, with upper and lower limit comparison alarm function and 99 groups of Data storage, automatic calculation and limit protection can be realized.
Laminating speed 1~ 10m/min, laminating accuracy 0.5mm, roll to roll Laminating design, equipped with automatic deviation correction device and split drying, suitable for a variety of non-elastic material Spreader.
Measured value 500N, suitable for rubber, cable, paper, electrical components, Plastic film and other materials tensile force, destructive force, insertion force test, supporting Force Gauge test bench.
Adopt small hydraulic force measuring device, drawing force up to 40KN, cylinder Travel 10mm, with a machine multi-purpose, novel structure, compact size, complete functions and other characteristics, high detection accuracy, support strength Mpa and force value KN two Measurement mode.
