Adopt 45 ° test angle and adjustable load system, the test platform traverse speed 0.5-10 mm/s adjustable, equipped with LCD display real-time monitoring, to meet the needs of accurate coating Hardness detection.
The pencil scratch method is used to test film Hardness, and the three-point contact design always guarantees a 45 ° angle, which meets the GB6379 standard and is suitable for film Hardness detection in laboratories and construction sites.
Adopt four-link mechanism to ensure a constant 45 ° test angle, equipped with 500/750/1000g adjustable load, accurately determine film Hardness through different Hardness pencil scratches, meeting standard test Environmental requirements.
The device adopts destructive measurement, resolution +/- 0.001mm, can carry out V-shaped incision, grid cutting and Cedar test, directly observe Coating thickness and Cedar length, support multi-layer film analysis.
The 45 ° fixed angle design ensures precise application of 1000g constant pressure, coating marks are evaluated by 13 different Hardness pencil systems, and the four-link mechanism ensures test Stability.
The 45 ° fixed angle design is adopted to ensure that the cylindrical pencil lead maintains a constant angle and pressure, the load is 500g, the error is +/- 10g, and the coating Hardness level is determined by the minimum Hardness value pencil trace.
The three-point contact structure is used to ensure stable sliding, the test angle is fixed at 45 °, and the 500/750/1000g adjustable load is equipped. The coating Hardness is accurately judged by the scratch depth of different Hardness pencils.
The three-point contact design ensures a 45-degree test angle and provides a 500/750/1000g three-speed load for rapid determination of coating Hardness and is suitable for laboratory and field environments.
Using 45 ° fixed angle design, ensure that the cylindrical pencil lead scratches the coating with constant pressure, the load is 750g, the error is +/- 10g, and the coating grade is determined by the minimum trace Hardness value.
Using 500g swing Rod mass and 8mm steel ball diaMeter, automatic counting function can accurately measure coating surface Hardness, swing cycle of 1 second to achieve efficient testing.
Using two-wheel and refill three-point contact structure, refill and test surface to maintain an angle of 45 degrees, equipped with 1000g weight, by pushing the Tester to accurately determine the film Hardness value, easy and reliable operation.
Using two-wheel three-point contact structure, refill and test surface to maintain an angle of 45 degrees, equipped with 500g weight load, by pushing the Tester can accurately determine the film Hardness value.
Manual measurement of film Hardness, test angle 45 °, load 1 +/- 0.05kg, three-point contact with the measured surface, suitable for inspection in any direction.
Hand type easy to operate, load 1000g, standard 6B-6H pencil, suitable for film hardness testing, test temperature 23 +/- 2 ℃ and Humidity 50 +/- 5% environment.
Using 200g swing Rod mass and 5mm steel ball diaMeter, automatic counting function can accurately measure coating soft Hardness, swing cycle 1.4s to ensure Data Reliability.
