Equipped with 8 Meters Oven, roller heating temperature up to 200 ℃, effective application width 500mm, Spreader thickness range 0.005-3mm, support automatic unwinding to winding process, suitable for hot-melt adhesive film.
Maximum Spreader width up to 1000mm, Spreader speed 1-10m/min adjustable, support unlimited length Spreader and automatic winding, forward and reverse stepless speed change, discharge and receiving reel tension adjustable, heating Rod and glue slot can be quickly disassembled to clean up residual glue.
The equipment adopts High Accuracy modular Spreader station, all-electric control without air source, minimum glue thickness 0.01mm, Spreader speed 2-4.5 m/min adjustable, with electronic control precision tension to adapt to a variety of materials such as paper, plastic and metal film.
Coating speed 1~ 10m/min adjustable, Spreader thickness range of 0.005-3mm, drying temperature up to 200 ℃, equipped with infrared drying and air cooling system to achieve efficient Spreader and drying.
The thickness range of Spreader is 0.01mm~ 2mm, the minimum gluing thickness is 0.01mm, the coating surface density ≤ +/- 1.5%, the dial Meter is used to fine-tune the gap and the Teflon baffle to adjust the width, and it supports forward and reverse continuously variable speed and automatic winding.
Adopt High Accuracy modular Spreader station structure, all-electric control without external air source; Spreader thickness can reach a minimum of 0.01mm, accuracy +/- 0.003mm; equipped with UV LED curing module, instant curing; Spreader width 400mm, speed 2-4.5 m/min adjustable, forward and reverse stepless transmission.
The equipment supports 400mm maximum Spreader width, Spreader thickness 0.01-2 mm adjustable, with forward and reverse stepless speed change and automatic winding function. The rubber groove and upper rubber wheel can be quickly disassembled and cleaned to adapt to different material tension control needs.
Temperature control accuracy of +/- 0.5 ℃, equipped with eight standard test force, can accurately determine the melt flow performance of polymers at high temperatures, to meet a variety of material testing needs.
High Accuracy modular Spreader station structure, Spreader thickness range of 0.01mm to 2mm, coating speed 2-4.5 m/min adjustable, support forward and reverse stepless variable speed and automatic winding, gap adjustment Graduation up to 0.001mm, easy to accurately control the Spreader process.
Adopting MCU to adjust power and temperature control mode, temperature control accuracy +/- 0.5 ℃, with eight standard test force, can meet the needs of different material testing, suitable for melt flow performance measurement at high temperature.
The fully automatic electronically controlled hydraulic pump provides smooth and continuous pulling force with +/- 1% accuracy, built-in rechargeable battery supports 200 tests, and IP65 Protection Rating ensures durability.
Blade Coating accuracy of +/- 0.003mm, meyer Rod coating accuracy of +/- 0.001mm, coating speed of 5~ 200mm/s, effective coating area of 400 * 300mm, Vacuum chuck and Touchscreen control ensure film uniformity and repRoducibility.
Using positive pressure test principle, Measurement range 0~ 1.6MPa, fully automatic operation, support three test modes, built-in calibrating program, suitable for quantitative measurement of various sealing performance indicators.
Can measure 50~ 200000mPa · s viscosity range, Temperature control accuracy of +/- 0.1 ℃, the use of high subdivision stepper motor to ensure smooth Rotation speed, support the whole process of monitoring viscosity - Linear dispersion, beyond the range of automatic alarm.
Fully enclosed metal Furnace body to enhance Baseline Stability, with imported alloy Sensor to enhance corrosion resistance; Temperature range covering room temperature to 600 ℃, support 0.1~ 100 ℃/min program temperature control, with 0.001 ℃ resolution and Automatic calibration function.
