Adjustable scraper Spreader mode, Spreader accuracy of +/- 0.02mm, equipped with air-cooled water-cooled double chill down system, Spreader rate of 5-25m/min, Heating Temperature range to 200 ℃ +/- 3 ℃.
Measurement range 2-3000uS/cm, Glass shell structure, three-core air interface, suitable for water quality analysis applications.
Adopting pure oil-free piston design, equipped with a 4L gas storage Tank, the noise value is as low as 58dB, with an inner coating anti-rust treatment and a multi-stage filtrate system, the air pressure can be adjusted within the range of 5-8Bar, and the size is small and easy to install.
With pH, conductivity, TDS and temperature Multi-ParaMeter measurement, pH range 0.0-14, EC range 0-3999 μS/cm, supports Automatic calibration and continuous monitoring, waterproof design and large screen display for easy operation.
With 12 water quality paraMeter detection capabilities, resolution of 0.001mg/L, Repeatability 2%, micro-processing technology and long-life Illuminant, support custom Linear dispersion calibrating and data smoothing.
Equipped with a 5.1-inch LCD screen to monitor water quality in real time, support three-way water quality and temperature display, automatically cycle to prolong the life of consumables, set the use time of consumables and remind, and one-click disinfection function to reduce bacterial contamination.
The 5.1-inch LCD screen displays three-way water quality and temperature in real time, with regular automatic circulation function to maintain water quality stability, water resistivity > 18.2MΩ · cm, support for consumable life setting and remote monitoring.
Vertical double air duct vertical hot air circulation design, temperature uniformity +/- 1.0 ℃, variable speed fan can adjust the air volume, large screen LCD display, independent temperature limit alarm system to ensure safe operation.
With 18.2 MΩ · cm high resistivity effluent, micro particulate matter (PM) less than 1/ml, support automatic circulation and consumable life management, 5.1 inch large screen real-time display of water quality paraMeters, optional disinfection function.
The melting temperature error is only +/- 1 ° C, allowing for remote observation of the melting state. It can be directly pasted without complex installation and is suitable for temperature monitoring of a variety of electrical equipment.
It can simultaneously detect 7 paraMeters such as PM2.5, formaldehyde, and TVOC, with an accuracy of +/- 10%. It is equipped with a 2.8-inch true color screen to display real-time trend charts, and supports 5000 data records and dual national standard selection.
Can simultaneously measure 7 water quality indicators, IP67 waterproof design, 45000 data storage capacity, support 1 second to 3 hours custom storage interval, with automatic temperature compensation and GLP management function.
Using composite ElectRode design, equipped with special reference filling solution and calibrating solution, Measurement accuracy is high, BNC interface compatibility is strong, suitable for a variety of water quality analysis scenarios.
Non-contact Sensor to reduce measurement drift, conductivity Measurement range of 0-10000 μS/cm, temperature accuracy of 0.1 ℃, support up to 3 years of battery life and 70 Meters water depth working environment.
Vertical double air duct vertical hot air circulation to ensure temperature uniformity, speed control fan can adjust the air volume to avoid blowing powder items, Temperature range RT + 10-300 ℃, studio volume 225L, equipped with independent temperature limit alarm system to ensure experimental safety.
