Measurement range 200~ 5600kPa, Precision ≤ +/- 0.5%, all-steel chain drive to improve Stability, three-dimensional semicircular window easy to observe the deformation process.
Equipped with A/B/C/E four kinds of corrugated pins, the diaMeter of the pins is Φ 2-3mm, the straight line is arranged without bending, and the unit length Corrugated Board gluing line can be separated to meet the testing needs of different sizes of paper pRoducts.
Suitable for a variety of Corrugated Board adhesive strength test, equipped with different specifications of steel needles, needle diaMeter range 1.0-3 mm, support A, B, C, E corrugated test, sample size 25 × 80mm.
Using 32-bit ARM processor to improve processing speed, Measurement range 250~ 5600kPa, automatic clamping system with air source operation, support pressure Linear dispersion real-time display and thermal print output.
The fixture can fix the upper and lower ends of the butterfly specimen into a vertical shape, test the vertical compression strength, suitable for a variety of Corrugated Board types, Dimension 150 * 105 * 65mm, weight about 2Kg, easy to operate.
Thrust sampling mode, cutting edge pressure sample 25mmx100mm and gluing sample 25mmx80mm, sampling thickness range of 18mm, suitable for Corrugated Board and carton mass detection.
Can cut 25 * 100mm sample, sampling error +/- 0.5mm, sampling thickness range of 18mm, fast and accurate completion of Corrugated Board Edge Crush Test and adhesive strength test sample preparation.
Using pneumatic clamping technology, the clamping force can be adjusted to more than 690Kpa, equipped with silicone oil system to avoid machine rusting. Fully automatic operation can store 50 sets of data, with emergency stop button and pressure monitoring function, Test accuracy of +/- 1% FS.
It can cut 32.2cm ² and 64.5cm ² samples, the sampling error is less than 0.5cm ², and the maximum sampling thickness is 15mm, which meets the accurate sampling requirements of Corrugated Board Flat Crush Test.
Measurement range 50~ 1600kPa, Precision ≤ +/- 0.5%, using all-steel chain drive to improve detection stability, equipped with chord length 41mm three-dimensional semi-circular full window observation window and intelligent control pressure relief system to ensure Test accuracy and operation convenience.
Equipped with long and short pin holders and Φ 3mm and Φ 2mm pins, the pin axis is less than 1/100 after the parallelism error combination to the bottom surface, and less than 1/200 when the force is 300N, making it easy to operate without adjustment.
The sealing performance of the test system is less than 10% pressure drop within 1 minute, the resolution is up to 0.1kPa, the maximum Breaking strength value is automatically retained and the trend printing detection results are supported.
Measurement range 50~ 1400kPa, accuracy error ≤ +/- 0.5%, fully enclosed hydraulic system to ensure high Stability, support a variety of unit conversion and thermal print output.
Using intelligent control pressure relief system, Measurement range 10~ 1600kPa, Indication Error ≤ +/- 0.5%, all-steel chain drive to improve Stability, real-time observation of test sample blasting process.
Measurement range covers 50~ 5600kPa, Precision up to +/- 0.5%, using all-steel chain drive and high voltage oil circuit sealing system to ensure test Stability and long life.
