Adopt Precision Sensor to achieve 0-50kgf insertion force test, support 0-60 times/minute speed regulation and 5-45mm Travel adjustment, with overload automatic stop and 10 sets of data automatic save functions.
Observation methods such as light-field, oblique illumination, and polarized light are adopted, and transparent and non-transparent samples can be observed with double reflection Illuminant, and the full field of view is high definition without blurring.
Measured value 500N, suitable for rubber, cable, paper, electrical components, Plastic film and other materials tensile force, destructive force and insertion force test, supporting the Force Gauge test bench.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
Measured value 500N, suitable for rubber, cable, paper, electrical components, Plastic film and other materials tensile force, destructive force, insertion force test, supporting Force Gauge test bench.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
Adopting spiral trapezoidal screw, it has the characteristics of manual operation, simple stability, vertical and lying dual-use, the maximum load is 500N, and the tensile force is Travel 200mm. It is suitable for tensile and compressive load, insertion and unplugging force, and failure test.
Using three-phase brushless DC motor to achieve 50-1500rpm stable speed regulation, temperature control accuracy +/- 1 ℃ and with temperature protection function, soft start design to prevent stirrer beating, suitable for long-term unmanned operation.
Equipped with automatic centering device to avoid eating unilateral problems, maximum load 50Kg, Test speed range 0-100mm/min, support dynamic Impedance test and a variety of damage strength test.
Speed range is 300-23000 rpm, and the internal suction homogeneous structure can effectively homogenize, emulsify and extract. Stirrer can be used at low speed.
Detection range 0-1000mm, dynamic range is greater than 36dB, with Automatic calibration and gate alarm function, support for a variety of working modes of straight oblique probes, compact and portable for field operations.
Measured value 1000N, suitable for rubber, cable, packing tape, electrical components and other materials tensile force, destructive force, insertion force test, designed for Force Gauge test bench.
Equipped with needle Probe for direct insertion measurement, the range covers -50 to 300 ° C, the accuracy reaches +/- 1 ° C, Repeatability +/- 1% or +/- 1 ° C, and it is small and lightweight only 60g.
Measured value 500N, suitable for all kinds of cable, Glass, leather, electrical components and other materials tensile force, destructive force, insertion force test, designed for Force Gauge test bench.
Using high frequency principle, measurement range 0-90%, resolution 0.1/0, Response Time 1 second, Sensor and main body integrated design, support insertion measurement and fast display.
