Support pH, conductivity and other 7 paraMeter measurement, accuracy of 0.001 level, with 3000 data storage and IP57 protection, Type-C charging interface for outdoor use.
Suitable for low conductivity water samples with conductivity above 100 µS/cm, using polymer liquid junction design, pH Measurement range 0-11pH, Temperature Measurement range 0-80 ℃, no need to add liquid reference system.
With 4 measurement functions, support pH range -2.000~ 20.000 and conductivity 0~ 20mS/cm, automatic temperature compensation and ElectRode diagnosis, can store 500 sets of data and comply with GLP specifications.
Supports pH, conductivity, dissolved oxygen and other 9 paraMeter measurement, equipped with 3.5 inch color screen and 3000 data storage, with IP57 Protection Rating and Type-C charging interface, suitable for on-site rapid detection.
Support pH, conductivity, TDS and other seven paraMeter measurement, Data storage 450 groups, with automatic temperature compensation and ElectRode diagnostic function, dustproof and waterproof grade IP54, Measurement accuracy of +/- 0.01pH.
Measurement range 0.00-14 pH, accuracy +/- 0.05pH, with temperature compensation function, portable design for easy field use, large screen LCD display is clear and intuitive.
Measurement range 0.00-14 pH, accuracy +/- 0.05pH, with automatic temperature compensation function, portable design for on-site fast detection, repeatability error only +/- 0.03.
Equipped with 7-inch high-resolution Touchscreen, supports 1000 sets of Data storage, pH1-5 point Automatic calibration and conductivity 1 point Adjustment, provides automatic temperature compensation and ElectRode diagnosis.
Glass bulb sensitive film, Measurement range 0-14pH, suitable for low Conductivity Detector sample measurement under closed static conditions, Dimension Φ 12 × 120mm.
Support three-channel simultaneous measurement, equipped with 5.5-inch high definition touch screen, pH Measurement accuracy of +/- 0.002pH, with automatic temperature compensation and end point locking function, suitable for fast and accurate detection in a variety of environments.
Microprocessor controlled, with 0.1-14 pH Measurement range and +/- 0.1 pH accuracy, support for three-point calibrate and temperature compensation, portable design weighing only 88g, suitable for on-site rapid detection.
Built-in three measurement units can simultaneously detect pH, Conductivity Detector and dissolved oxygen, support automatic temperature compensation and ElectRode diagnosis, with IP54 Protection Rating, data storage capacity of 500 groups, support GLP specification to achieve data traceability.
Combined ElectRode can simultaneously measure pH, conductivity, TDS, salinity and temperature, support one-button switching paraMeters; Conductivity Detector ElectRode platinum black to reduce Polarization effect, accuracy of +/- 0.01pH; with automatic temperature compensation and IP67 dustproof and waterproof design.
Support 0.00-14 pH and 0.00-10 mS/cm conductivity measurement, automatic temperature compensation, 24-hour continuous monitoring, high and low alarm LED indication, Data storage interval of 15 minutes.
Equipped with 5.5 inch high definition touch screen, supports dual channel simultaneous measurement of 8 paraMeters, pH accuracy of +/- 0.002, with automatic temperature compensation and end point locking function, built-in GPS positioning and real-time data transmission.
