High borosilicate Glass material, corrosion resistance and high and low temperature resistance, strong ability to withstand thermal Impact; vacuum negative pressure can reach 0.095MPa, support material reaction under negative pressure; Overhead Stirrer Rotation speed 50-500rpm, torque 70N.cm, suitable for a variety of viscosity materials.
Can reduce the contact resistance of 35~ 95% and temperature rise of 35~ 85%, high temperature resistance up to 200 ℃, with anti-oxidation, anti-corrosion performance, suitable for a variety of metal connections, improve safety and stability.
The use of national standard 06Cr19Ni10 stainless steel precision machining, high temperature resistance up to 300 ℃, low temperature resistance to -100 ℃, hardness ≤ 187HB, with acid and alkali resistance, grinding anti-sinking, anti-stick, suitable for dry grinding and wet grinding.
High borosilicate Glass material, corrosion resistance and can withstand large thermal Impact, vacuum negative pressure of 0.095MPa, Speed range 50~ 500rpm, suitable for material synthesis and distillation recovery.
Using high borosilicate Glass material, corrosion resistance and can withstand -80~ 200 ℃ Operating temperature, vacuum negative pressure of 0.095MPa, equipped with PTFE four-leaf stirringRod and RWD50 top Stirrer, Speed range 50~ 500rpm, support precise control and uniform material reaction.
Can reduce the contact resistance of 35~ 95%, reduce the temperature rise of 35~ 85%, high temperature resistance of 200 ℃, with anti-oxidation, anti-corrosion performance, suitable for different metal connections, improve electrical connection Stability.
Pottery and porcelain made of Zirconia, High Hardness, Abrasion Resistance, Ensure Measurement Stability and Repeatability; Good Chemical Stability, Corrosion Resistance, Suitable for high temperature environment, Range 0~ 50μm, Graduation 2.5μm.
4-Terminal Resistance Measuring method is used to eliminate the influence of wire resistance. Test speed is up to 6 times/sec. Measurement current is less than 100mA to prevent temperature drift and ensure Precision and Stability.
Suitable for laboratory sampling test, high corrosion resistance, can measure a variety of material density, with sampling test type for liquid special anti-corrosion accessories.
Can reduce the contact resistance 35~ 95% and temperature rise 35~ 85%, high temperature resistance up to 170 ℃, with anti-oxidation, anti-corrosion performance, suitable for a variety of metal connections, improve safety and extend service life.
The equipment is designed according to the international coating stain resistance experimental method, the water Tank volume is 5L, the inner diaMeter of the flow pipe is 8mm, and the time control range is 0~ 99h99s. It is suitable for the stain resistance test of building exterior coatings.
The pRoduct can reduce the contact resistance by 35~ 95%, reduce the temperature rise by 35~ 85%, high temperature resistance up to 170 ℃, with anti-oxidation, anti-corrosion performance, suitable for different metal conductor connection, improve safety performance.
Using 2-wire method and 3-wire method measurement, Ground Voltage Measurement range 0~ 200V, Ground Resistance Measurement range 0~ 1999 Ω, Response Time about 5 seconds, with continuous measurement and overload protection function.
Double grinding head assembly configuration, total weight 1500g, Reciprocating Frequency 37 +/- 2 times/min, Travel 300mm, can accurately evaluate the stain resistance of the film.
Four-terminal Resistance Measuring method is used to eliminate the influence of wire resistance, test Precision 0.1% reading + 2 words, Measurement speed is fast 32 times/second, with perfect sorting function, alarm value can be set for percentage sorting, strong anti-interference ability.
