Compression stroke 2.50mm, load 237g, suitable for wet mold sand/core surface Hardness measurement, support USB and Bluetooth data output, with average calculation and undervoltage alarm function.
Suitable for manual or mechanical low and medium pressure molding of fine sand core testing, compression stroke 2.50mm, load 980g, with average calculation and MAX Maximum latch function, support data output communication.
Using 1400rpm speed regulation and 1.5 liters effective volume sand grinding basket, rapid dispersion and grinding are achieved through tensile shear and Impact between sand and material, and the operation is simple.
The variable frequency motor is used to achieve stepless speed regulation from 0 to 7500 rpm, equipped with dispersed impeller and sand grinding blades, and the dual-axis constant force lifting system has a stroke of 200mm, which can adapt to different experimental requirements and calculate the material reaction relationship.
Set dispersion and sand grinding functions in one, complete two processes in a single container, speed range 130~ 3000rpm, grinding basket size Φ 80x60mm, high efficiency and easy to clean.
Suitable for high voltage molding sand test, compression stroke 2.50mm, load 1500g, with average calculation and MAX Maximum latch function, support USB and Bluetooth data communication.
Measurement accuracy of 0.01pH and Temperature range of 0-60 ℃ is achieved by adopting high performance ceramic sand core liquid interface and additive liquid reference structure.
Using dual-axis constant force lifting system and variable frequency motor, 0-3000rpm stepless speed regulation, equipped with dispersed impeller and sand grinding blades, can directly calculate the relationship between material viscosity and reaction rate.
1400 rpm high-speed stirring is used to achieve strong tensile shear and Impact between the material and the sand, and the fineness of grinding can reach 25 microns or less, suitable for sample testing, with a capacity of 1.5 liters.
1400 rpm high-speed stirring is used to achieve strong tensile shear and Impact between the material and the sand, the fineness of grinding can reach 25 microns or less, and the capacity is 1.5 liters, which is suitable for laboratory sample dispersion grinding.
Using 0.06mm ultra-fine stainless steel wire, the wire diaMeter is thinner than the common 0.07mm in the market, the bristles are soft and can be deeply cleaned without damaging the roller surface, suitable for fine cleaning applications.
Adopt frequency conversion motor to achieve stepless speed regulation of 60-8000rpm, equipped with dual-axis constant force lifting system and sand grinding blade disc, with digital display Rotation speed and timing function, lifting Travel up to 250mm.
Using 0.06mm ultra-fine steel wire, soft bristles, effective cleaning of anilox rollers and Mayer Rods, to avoid surface damage, handmade to ensure mass.
Using 0.06mm ultra-fine steel wire, the bristles are soft, allowing for deep cleaning of anilox rollers and Mayer Rods to avoid surface damage, and are handmade by experienced craftsmen to ensure quality.
Suitable for medium and high viscosity materials, using bottom open turbine structure with strong suction pump effect, grinding medium diameter 0.8-2 mm, variable frequency speed range 0-1440rpm, equipped with chill down heating jacket to control material temperature.
