Travel 0-1.25 mm, measurement error +/- 1HAM, pressure at the end of the needle 324-764mN, suitable for thin rubber samples with a thickness of 1.5mm or more, and can be used with a fixed load measuring rack.
Suitable for low Hardness Rubber and Sponge Determination, Measurement range 20-90HAO, Indication Error ≤ +/- 1HAO, Portable design for quick field testing.
Measurement range 0~ 10mm, accuracy ≤ 0.02mm, probe center to the maximum measurement depth 130mm, Dial reading, portable handheld design, suitable for on-site rapid detection.
Measurement range 0.8~ 300mm, accuracy up to +/- 0.04mm, support high-speed measurement 10 times/second, portable design for field use.
Travel 0-1.25 mm, measurement error +/- 1HAM, suitable for thin rubber samples with a thickness of 1.5mm or more. Sensitivity is high, and it needs to be used with a constant load measuring rack to ensure Precision.
Suitable for medium hard resilience, rubber or microporous materials, Measurement range 0-100HE, more suitable for thinner or curved samples, can be used with handheld or supporting bench.
Measurement range 0-10mm, accuracy ≤ 0.02mm, using Dial reading, Graduation 0.01mm, upper probe diaMeter 6mm plane, suitable for workshop site and laboratory thickness measurement.
Measurement range 0-1mm, Graduation 0.001mm, probe diaMeter 5mm plane design, portable handheld for rapid measurement in the workshop, in line with industry standards.
Pin Travel 0~ 2.5mm, Measurement range 0~ 100HA, error +/- 1HA, can be used in the matching measuring rack or handheld, to meet a variety of rubber hardness testing needs.
Measurement range 0-20mm, accuracy ≤ 0.02mm, probe diaMeter Φ 6mm, Dial reading indexing value 0.01mm, pressure 22kPa +/- 5kPa, in line with chemical industry standards.
Measurement range 0.75-400 mm, accuracy +/- (0.1 + 1% H) mm, support standard and ultra-thin mode, built-in speed of sound of various materials, portable design for on-site inspection.
Measurement of nonmagnetic coatings on ferrous metals, thickness range 0-6000μm, accuracy +/- 3%, built-in Probe single-handed operation, Protection Rating IP65, 60 + readings per minute.
Suitable for soft rubber, thermal plasticity resilience and other materials, Measurement range 0-100HO, resolution 1HO, can be used in hand or with the test bench, in line with ASTM D2240 standard.
Measurement range covers 0.8-350 mm, the highest accuracy is +/- 0.05mm, with 240 × 160 dot matrix LCD display, portable design weighs only 230g for field work.
Suitable for soft rubber, thermal plasticity resilience and extremely soft plastics, Hardness Measurement range < 20 HDO, with real-time, peak, timing and average Measurement mode, can be connected to the computer for data management and analysis.
