Adopt gear pair drive, hand-pressed operation, rated load 500N, Travel 70mm, the upper and lower height of the frame can be adjusted, Force Gauge has a positioning structure, suitable for batch testing.
Adopt gear pair transmission, hand-pressed operation, the height of the frame can be adjusted up and down, Force Gauge up and down movement is equipped with positioning structure, rated load 500N, Travel 70mm, suitable for batch testing.
Operating Pressure 0-5MPa adjustable, PID intelligent temperature control accuracy +/- 3 ℃, hydraulic system with long-term pressure holding function, press plate Travel 200mm, suitable for hot pressing and hot calendering experiments, to meet the QB/T3703-1999 standard requirements.
Thrust sampling mode, cutting edge pressure sample 25mmx100mm and gluing sample 25mmx80mm, sampling thickness range of 18mm, suitable for Corrugated Board and carton mass detection.
Horizontal press measurement combined with a physical positioning observation window, with repeatability accuracy dE*ab ≤ 0.02. It supports 5 measurement apertures and over 30 measurement parameters, and enables color data sharing through a mobile application.
Measurement range 2T, pressure speed 5~ 300mm/min stepless adjustable, support 7-inch Touchscreen real-time display of compressive Linear dispersion, suitable for a variety of carton strength detection.
The linear guide is used to ensure smooth and fast sampling, and the imported tungsten sheet is cut without burrs and durable. It supports 18mm thickness sampling, and can cut 25 × 100mm and 25 × 80mm samples.
The thermostat is used to control the heat transfer of the heating tube, the temperature accuracy is +/- 2 ℃, and the heating range is adjustable from room temperature to 250 ℃; it is equipped with light curtain protection device and temperature abnormal alarm function, and the operation is safe and reliable; the parallelism of the upper and lower templates is within 0.05 to ensure uniform pressure.
Adopt hand-crank mechanical pressurization method, Heating power 650W, Mold sleeve specification < 40mm, suitable for small or irregular samples, support thermosetting material inlay.
The imported sliding track is used with the blade to cut multi-layer Cardboard samples, the sampling size error is +/- 0.5mm, the sampling thickness range is 18mm, the scale laser engraving is clear and wear-resistant, and the strong magnet is convenient for blade installation.
Hand-crank mechanical pressurization is easy to operate, digital temperature controller to ensure stable temperature, Heating power 440W, mold sleeve specification < 25mm, suitable for thermosetting material inlay, protect the edge of the sample.
Can cut 25 * 100mm sample, sampling error +/- 0.5mm, sampling thickness range of 18mm, fast and accurate completion of Corrugated Board Edge Crush Test and adhesive strength test sample preparation.
Adopting imported sliding track and blade, it can cut samples with accurate parallelism, Measurement range 10~ 1000mN, cutting size 100 × 60mm, scale laser engraving clear and wear-resistant.
Rated load 500N, rack and pinion drive, hand pressure operation is simple and stable, large foot design to ensure smooth measurement process, Travel 75mm, suitable for Force Gauge installation for tensile or plug force test.
Sampling area 100cm ² and error +/- 0.35cm ², removable knife edge sharp handle, with anti-cutting hand protection device, can handle Paper thickness 0.1~ 1.2mm and Corrugated Board 0.1~ 7mm.
