Gas Sleeve Heating mode is used to heat up quickly and evenly, Temperature Fluctuation +/- 0.5 ℃, carbon dioxide concentration recovery time is short, double door design sealing is good for easy observation, Humidity evaporates naturally.
With manual and automatic temperature compensation function, concentration Measurement range 1 × 10 ^ ²~ 5 × 10 ^ mol/L, the fastest reaction time is less than 4 minutes, support pFe value and iron Ion concentration display.
Can simultaneously detect 4 kinds of gases, integrated temperature Humidity detection, support diffusion and pump sampling, with Internet of Things remote monitoring function, Response Time T90 ≤ national standard, Protection Rating IP66, Operating temperature -40~ 55 ℃.
Support Bluetooth wireless transmission, can access data through mobile devices within 30 Meters. Built-in self-calibrated CO2 Sensor, Measurement range 0-5000ppm, high accuracy and low maintenance cost. At 5 minutes Sampling rate, the battery can support operation for up to half a year.
4 groups of samples can be tested at the same time, using PID temperature control accuracy of 0.1 ℃, support segmented program heating, one key automatic calculation of carbon black and ash content, open the lid structure heat dissipation fast.
Maximum support for simultaneous detection of 4 gases, integrated temperature and humidity detection, support for diffusion and pump sampling, remote paraMeter configuration and program upgrade functions, Response Time T90 ≤ national standard, Protection Rating IP66.
Maximum support for simultaneous detection of 4 gases, integrated temperature and Humidity detection, compatible with pumping and diffusion Sampling method, Response Time T90 ≤ national standard, detection accuracy ≤ +/- 3% FS, with Internet of Things remote monitoring and a variety of Installation methods.
4 groups of samples can be tested at the same time, using PID precise temperature control technology, Temperature range from room temperature to 1000 ℃, with automatic calculation of carbon black content and ash content function, open lid structure heat dissipation effect is better.
The thermal weight loss method is used to measure carbon black content, the operating temperature can reach 990 ° C, and the 7-inch Touchscreen is equipped to realize one-button calculation, support segmented paraMeter setting, and the Furnace body separation design has better heat dissipation.
Using Infrared Sensor to Monitor Carbon Dioxide, Response Speed is Fast and Not Affected by Temperature Humidity. The circulating fan speed is automatically adjusted to avoid sample volatilization. Equipped with Microbial Filter, the filtrating efficiency is 99.99%.
The equilibrate refrigeration technology makes the temperature fluctuation small, equipped with fluorine-free R134 refrigerant to achieve energy saving and environmental protection, high temperature control accuracy and constant humidity, liner mirror stainless steel material is easy to clean and maintain, and the volume is 100L to meet the needs of various experiments.
Using 32-bit microprocessor and 24-bit ADC chip, equipped with 2.4-inch high definition screen, support multi-Sensor and a variety of signal output, with explosion-proof and anti-corrosion design, Response Time ≤ 20s, detection accuracy ≤ +/- 2%.
Pump suction sampling and infrared Sensor technology, range 0~ 2000ppm, resolution 1ppm, Response Time ≤ 20s, with IP65 Protection Rating and Dust Filter, adapt to harsh environment.
Using infrared NDIR detection principle, range 0-500ppm, accuracy ≤ +/- 1% F. S, Response Time ≤ 30 seconds, support 4-20mA, RS485 and wireless signal output, with explosion-proof structure and remote monitoring capability.
Pump suction sampling and dust design, equipped with dust Filter, Response Time T90 ≤ 20s, detection accuracy ≤ +/- 1%, suitable for harsh industrial environment.
