Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
Adopting rotary oscillation design, Frequency 3000rpm, pendulum amplitude 5mm, suitable for small containers such as testtube and Colorimetric tube, it can efficiently handle the experimental requirements of large chemical reactions and few solutions.
High dispersion efficiency and no need to clean, Rotation speed of crankshaft 660rpm, up and down amplitude 16mm, shock-absorbing spring design, clamping a variety of containers, easy to operate.
The equipment supports 0.5-20 liters of barrel paint mixing, revolution speed 100-200rpm, rotation speed 200-400rpm, using multi-stage intelligent frequency conversion speed regulation and door opening and shutdown protection to achieve smooth operation and safe operation.
The equipment has high dispersion efficiency and no need to clean, the crankshaft Rotation speed is 660rpm, the upper and lower amplitude is 16mm, the clamping capacity is 2L, and the Floor-Standing structure is equipped with shock absorber springs, which is stable and convenient to operate.
Adopting a planetary two-way swirl/spin structure, the mixing arm runs in reverse with the basket to achieve rapid mixing, with a maximum load of 300g and a speed range of 400-2800rpm. The equilibrate is quiet and can be operated directly in the syringe or test bottle.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
High dispersion efficiency and no need to clean, Crankshaft Rotation speed 660rpm, up and down amplitude 16mm, vertical structure equipped with shock absorber spring, support bottle and can two Operating Mode.
Using the rotary oscillation mode, Oscillation Frequency up to 3000 rpm, swing amplitude of 5mm, through smooth contact to achieve rapid mixing, speed can be adjusted with pressure, suitable for a variety of laboratory applications.
Using stepless speed regulation technology, Speed range 0~ 2800rpm, turnover diaMeter 4mm, support point and continuous Operating Mode, high performance motor to ensure rapid mixing and low noise.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
Explosion-proof design, suitable for flammable and explosive environment; with variable speed stirring function, can quickly and accurately disperse material particles to meet the grinding process requirements of paints, inks and other industries.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
