Using electric push Rod to drive Spreader movement, avoid manual Stability; equipped with touch screen real-time display of moving distance, support 2-200mm/s speed adjustment and 430 * 250mm effective coating area, Operating interface is simple and intuitive.
Spreader movement driven by electric push Rod, adjustable speed range of 2-200mm/s, equipped with Vacuum chuck table to effectively fix the substrate, Operating interface intuitively simplifies the process, improves Spreader accuracy and efficiency.
Glass-lined, FRP, epoxy coal asphalt coatings of different thicknesses can be mass tested by high voltage detection technology. When the coatings have defects such as pinholing and bubbles, the instrument will emit bright sparks and sound and light alarms.
Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
Using large torque stepper motor to achieve automatic reset to zero, indentation accuracy of 0.01mm, support 0.1-0 mm/s adjustable speed, through the indentation depth to determine the minimum depth of coating cracking or disengagement.
Using frequency conversion brushless motor, Rotation speed up to 8000RPM, Electric lift Travel 300mm, brushless abrasion, can handle high viscosity materials, provide stable shear rate.
With a 45 ° test angle and an adjustable speed of 5mm/sec, equipped with a 500g weight and a standard pencil set, stable and low-noise electric control is achieved through a stepper motor.
Adopt electric lifting system, lifting Travel 270mm, speed range 60~ 8000rpm, integrated mixing, sand grinding, dispersion multi-function, compact structure and low noise.
Using electric Dial design, the scratch length can reach 60mm, the load range is 0-2000g, and the physical characteristics of the coating are characterized by the anti-penetration ability of the scribing needle.
3000W three-phase asynchronous motor to achieve 0-3000rpm Rotation speed, equipped with a variety of stator head to adapt to different viscosity materials, electric lift Travel up to 600mm, can run for a long time low temperature and support timing automatic shutdown.
Rotation speed of 10000rpm is achieved by using 750W three-phase asynchronous motor, and the electric lifting platform supports 300mm Travel, which can handle 10L materials and work continuously for a long time.
Electric lifting design is light and convenient, the highest Rotation speed of 3000rpm, line speed of 33m/s, double-end sealing structure to ensure the vacuum sealing defoaming effect, suitable for viscosity ≤ 25000cps material.
Mirror stainless steel liner and electric heating film heating, Temperature Uniformity +/- 1 ℃, heating speed, double-decked door design to reduce heat loss, four corners arc easy to clean.
Rotation speed up to 3000rpm, linear speed up to 33m/s, electric lifting design, double-end sealing structure, suitable for viscosity ≤ 25000cps materials, uniform dispersion and good defoaming effect.
Rotation speed up to 3000rpm, maximum line speed 33m/s, electric lifting design easy to operate, double-end sealing structure to ensure the vacuum sealing defoaming effect, suitable for viscosity ≤ 25000cps material.
