Using hexagonal aluminum alloy structure, Measurement range 25~ 3000um, Division 25~ 200um, Coating thickness can be measured immediately after construction, in line with GB/T1764 and other standards.
Range 20-370 microns, accuracy 10 microns, stainless steel corrosion resistance, hexagonal design with 24 scales, suitable for different Coating thickness measurement.
In line with ISO2808-1974 standard, the range is 0~ 150μm, the accuracy is not more than 5μm, can measure the wet film thickness and estimate dry-film thickness, suitable for laboratory and pRoduction control.
Made of stainless steel, the thickness is only 1.5mm, the range is 20~ 200μm, Division 20μm, the card design is convenient for quick measurement of wet-film Coating thickness on site.
Wire-wound design, wet film thickness 118.9μm, diaMeter 9.5mm, stainless steel material, wear resistance and corrosion resistance, suitable for preparing specific film thickness wet-film.
In line with ISO2808 standard, the range is 0~ 500μm, the accuracy is not more than 5μm, can measure the wet film thickness and estimate dry-film thickness, suitable for laboratory and pRoduction site.
Spreader 10 micron wet film thickness, 304 stainless steel material, easy to clean unbroken wire, provide customized services.
Using stainless steel material, application width 300mm, wet film thickness 77.7μm, film accuracy of 0.1 micron to ensure uniform film.
Stainless steel material is sturdy and durable, with a range of 50-950 microns, Division 50 and 100 microns, and a compact shape of only 65 * 43 * 1.5mm, suitable for rapid measurement of wet film thickness on site.
Spreader formed process to ensure uniform, wet film thickness 36.6μm, application width 300mm, suitable for accurate film thickness control, the total length of 400mm easy to operate.
The formed process is used to form a continuous groove to control the wet film thickness, the wet film thickness is 5 μm, the application width is 250mm, and the workmanship is fine and the environmental protection Encasement.
Formed to achieve 35 micron wet film thickness, uniform film and good repRoducibility, 304 stainless steel material to ensure durable and easy to clean.
The cold extrusion process is used to form a continuous groove to control the wet film thickness, the wet film thickness is 5 μm, the material is 304 stainless steel, and the workmanship is fine and environmentally friendly. Encasement.
Measuring wet-film flow thickening in the vertical state, controlling the physical performance of the coating to select the appropriate wet film thickness to ensure uniform film thickness, Film thickness range 450-675μm, in line with GB/T 9264 and ASTM D 3730 standards.
The formed pRoduction process is adopted, the wet film thickness is 42 μm, the application width is 60mm, the preparatory coating is uniform and the film thickness is accurately controllable, which is convenient for comparative analysis by conversion of dry-film thickness by Solid content.
