Using 2000g +/- 5g roller load and 300mm/min rolling speed to ensure that the adhesive tape sample is flat and evenly adhered to the standard substrate, in line with CNS-11888 and PSTC-8 design standards.
The adhesive force of the tape is 4.3N/cm, and the principle of cross-cut method is adopted, which is suitable for adhesion testing. The performance is stable and non-degumming, and the test results are accurate and reliable.
Measured value 500N, suitable for tape, PCB, adhesive tape and other materials disbonding force test, supporting the Force Gauge test bench.
The equipment tests the initial Tack by short contact between steel ball and adhesive tape sample at a small pressure, adjustable tilt angle 0~ 60 °, rolling ball range 1/32 inch to 1 inch, suitable for a variety of material adhesion evaluation.
Equipped with 10-station synchronous test capability, 1000g weight and 1-999999 minute Timer, using SUS #304 steel plate to ensure test accuracy, and automatically recording tape peeling time.
Using reciprocating friction method, friction load 500g, Friction Frequency 40 +/- 2 times/minute, can simulate drying or wet conditions for material wear-resistant decolorization test.
Measurement accuracy of 0.007mm, Graduation of 0.001mm, probe diaMeter Φ 5mm, maximum measurement depth 45mm, suitable for on-site rapid thickness detection.
Using microcomputer control to achieve automatic testing, equipped with High Accuracy force sensor accuracy of 0.001N, special drive system running smoothly, can simultaneously measure static friction and dynamic Coefficient of Friction.
Tack testing to assess adhesion by measurement of displacement or peeling time under specified weight. With thermostatic test chamber, multi-national standards are supported and the operation process is clear.
Based on the national standard design, the static Coefficient of Friction and the dynamic Coefficient of Friction can be measured simultaneously, with a test accuracy of up to 0.001N, equipped with High Accuracy Sensor and special drive system to ensure smooth operation and accurate results.
Can simultaneously detect dynamic and static Coefficient of Friction, force range 0~ 5N, accuracy level 1, support microcomputer control and micro printer output test report.
Using microcomputer control to achieve automatic testing, equipped with High Accuracy force sensor accuracy of 0.001N, special drive system running smoothly, can simultaneously measure static friction and dynamic Coefficient of Friction.
Automatic measurement and display of dynamic and static Coefficient of Friction, Measurement accuracy +/- 1%, slider traverse speed 100mm/min, stable performance, accurate testing, complete functions, easy to operate.
The grinding head reciprocates within 110mm Travel, and the Friction Frequency is adjustable from 20 to 60cpm. It cooperates with 1000g weight to test Abrasion Resistance under different pressures, and the digital display counter directly displays the number of frictions.
It can automatically measure the dynamic and static Coefficient of Friction at the same time, using high-precision ball screw drive, the total error of the force measurement system is less than +/- 2%, and the micro printer can print multiple sets of results and the average value.
