Made of stainless steel, the range is 10~ 100μm, Division 10μm, Dimension 65 * 36 * 1.5mm, suitable for Paints, varnish and other Coating Coating thickness measurement.
Equipped with 18 standard color scale solution, prepared according to GB/T1722-92 standard, using an inner diaMeter of 10.75mm Glass testtube, Color comparison is carried out in the Color Assessment Cabinet to ensure accurate measurement results.
Polygonal structure design, range 25~ 2032µm, in line with GB/T1764-79, GB/T134522-92, ISO 2808-74 standards, suitable for Paints, varnish and other Coating wet film thickness measurement.
The aluminum alloy material ensures durability, the volume of 100ml meets the standard measurement requirements, and the 0.1 ℃ indexing thermoMeter can achieve accurate density determination, suitable for laboratory environment.
The device can quantify the liquid transparency level, the wavelength range is 340-1000nm, the transmittance accuracy is +/- 1%, the operation is simple and convenient, and it is suitable for detecting impurities and turbidity.
Aperture 4.26mm, viscosity range 200-1200cSt, outflow time 20-80 seconds, in line with ASTM standard design, can quickly determine the Newton type liquid viscosity, suitable for a variety of viscosity test scenarios.
Using large torque stepper motor to achieve automatic reset to zero, indentation accuracy of 0.01mm, support 0.1-0 mm/s adjustable speed, through the indentation depth to determine the minimum depth of coating cracking or disengagement.
The conduit height is 1265mm, allowing pass/fail and grading tests to determine the minimum impact energy required for coating cracking or disbonding, and the punch diaMeter can be selected as 15.9mm or 20mm.
The equipment adopts automatic counting mode, the length of the swing Rod is 500 +/- 1mm, and the total mass is 120 +/- 1g, which is suitable for testing the ability of the film to resist concave deformation.
Conical mandrel size is 3.1~ 38 mm, length 203 mm, stainless steel material, wear resistance and corrosion resistance, can test the bending performance of steel, aluminum alloy and plastic sample, easy to operate.
The stainless steel material ensures corrosion resistance, provides 600μm fixed film thickness accuracy, and the application width is 100mm, which is suitable for preparing uniform and comparable samples on flat substrates.
8Mm diaMeter outflow hole design, durable stainless steel material, can be freely replaced with filter holder, expand the test range of viscosity Cup, meet different viscosity measurement needs.
1000 +/- 5g dead weight and 500 +/- 5g payload combined pressure, equipped with 20 times reading Microscope to achieve 0.1mm accuracy measurement, can quantify the anti-indentation performance of coatings and support plastic deformation analysis.
Equipped with 200 +/- 0.2g and 500 +/- 0.1g two swing bars, can measure the film damping time, reflect the surface Hardness through swing attenuation, support different standard test requirements.
Sinking diaMeter 20mm, maximum depth 10mm, with automatic and manual zeroing function, can be single and double top coating laminate test, sinking accuracy up to +/- 0.05mm, resolution 0.01mm.
