It can simultaneously detect 7 paraMeters such as PM2.5, formaldehyde, and TVOC, with an accuracy of +/- 10%. It is equipped with a 2.8-inch true color screen to display real-time trend charts, and supports 5000 data records and dual national standard selection.
Electrochemical sensor, formaldehyde detection range 0-20ppm, resolution 0.1ppm, with sound, light, vibration triple alarm, IP65 Protection Rating, built-in 1500mAh lithium battery can work continuously for 8 hours.
Pump-suction Sampling method, detection accuracy ≤ +/- 3%, resolution of 0.01ppm, Response Time T90 ≤ 20 seconds, built-in large-capacity battery, support for multi-Sensor expansion, with IP65 Protection Rating.
Using 32-bit microprocessor and 24-bit ADC chip, equipped with 2.4-inch high definition color screen, supports 1-6 Sensor configurations, with 4-20mA output and RS485 communication, Protection Rating IP65, suitable for harsh environments.
Using industrial grade Sensor, Response Time is less than 30 seconds, accuracy +/- 3% FS, with explosion-proof and explosion-proof shell design, support 4-20mA and RS485 output, adapt to -10~ 40 ℃ working environment, ensure reliable monitoring of various gas concentrations.
Electrochemical sensor, Response Time less than 30 seconds, Measurement range 0~ 10ppm, with explosion-proof structure and 4-20mA standard signal output.
MCU chip to achieve low power operation, equipped with intelligent Sensor to ensure detection accuracy ≤ +/- 3% F. S, Response Time ≤ 30 seconds, support 4-20mA, RS485 and switching signal output, easy access to various industrial control systems.
Adopt MCU chip to achieve low power consumption operation, detection error ≤ +/- 3% F. S, Response Time ≤ 30 seconds, support 4-20mA, RS485 and switch output, can be operated by remote control without opening the lid, with explosion-proof protection structure.
Low-frequency signal penetration depth of 20mm, can simultaneously measure concrete carbide moisture content and plaster moisture content, built-in environment Sensor, support a variety of professional probe expansion measurement function.
The stainless steel inner box is used to ensure non-adsorption formaldehyde, the background concentration is as low as 0.006mg/m ³ and the holding time is long; Temperature range 15-40 ℃ accuracy +/- 0.5 ℃, humidity range 30-80% RH accuracy +/- 3%; low failure rate, the average initial maintenance interval exceeds 3 years.
4 groups of samples can be tested at the same time, using PID precise temperature control technology, Temperature range from room temperature to 1000 ℃, with automatic calculation of carbon black content and ash content function, open lid structure heat dissipation effect is better.
Conductivity Detector measurement principle, measurement range 0~ 84%, resolution 0.1%, Response Time 1 second, with temperature and humidity compensation function, portable design weight only 203 grams.
Sharp probe measurement without leaving marks, measurement range 6%~ 90%, support wood moisture content and wood humidity equivalent value display, equipped with extended Probe and hammer ElectRode for different depth measurement.
Maximum 4 kinds of gas simultaneous detection, integrated temperature and Humidity monitoring, with sound and light alarm function, Response Time T90 ≤ national standard, Protection Rating IP66, suitable for a variety of Installation methods.
Maximum support for simultaneous detection of 4 gases, integrated temperature Humidity detection, dual temperature Humidity compensation design, with a variety of wireless communication options, Response Time T90 ≤ national standard, Protection Rating IP66.
