Sampling diaMeter 112.8mm, Film thickness range 0.1-1 mm, can accurately cut 100cm ² standard samples, suitable for paper physical performance testing requirements.
The sampling area is 100mm ² and the error is controlled within +/- 0.35cm ², which can handle 0.1~ 1.2mm Film thickness materials. The circular sampling design is used to ensure the standard of the sample, and the operation is simple and the results are reliable.
The sampling area is 100cm ², the error is controlled within +/- 0.35cm ², and the material with 0.1-0 thickness can be processed. Special design is used to ensure accurate and fast sampling.
Can cut 100cm ² standard area sample, sampling error +/- 0.35cm ², suitable for a variety of sheet material sampling, thickness range 0.1-5 mm, Operating temperature 20 +/- 10 ℃.
The sampling area is 100cm ², the sampling thickness range is 0.1-1 mm, and the sampling error is +/- 0.35cm ². It is suitable for paper Basis Weight determination and sheet burst resistance test standard sample sampling.
Simultaneous sampling ECT (100 * 25) mm and PAT (80 * 25) mm two sizes, sampling error +/- 0.5mm, thickness range ≤ 10mm, easy to operate.
The sampling area is 100cm ², the sampling error is +/- 0.35cm ², the sampling thickness range is 0.1-3 mm, and the special treatment die blade is durable and free of replacement.
The linear guide is used to ensure smooth and fast sampling, and the imported tungsten sheet is cut without burrs and durable. It supports 18mm thickness sampling, and can cut 25 × 100mm and 25 × 80mm samples.
It can quickly and accurately cut the standard sample with a diaMeter of 125mm, and the sampling thickness range is 0.1-0. It is suitable for the determination of paper Water Absorbency and is a special tool for the preparation of laboratory standard samples.
Precision combination of cutting edge to ensure that the sample edge flat, especially for ring pressure test design, can cut standard samples, easy to operate, cutting effect is good.
Sampling area 100cm ² and error +/- 0.35cm ², removable knife edge sharp handle, with anti-cutting hand protection device, can handle Paper thickness 0.1~ 1.2mm and Corrugated Board 0.1~ 7mm.
The punching sampling method ensures accuracy, the sampling size error is controlled within 0.1mm, and two specifications of 70 * 38mm stiffness and 36 * 38mm crease stiffness are supported.
Thrust sampling mode, cutting edge pressure sample 25mmx100mm and gluing sample 25mmx80mm, sampling thickness range of 18mm, suitable for Corrugated Board and carton mass detection.
The special No. 10 steel knife edge is used to ensure durability, the punching sample is smooth without burrs, the integrated casting structure is sturdy and not deformed, the sampling area is 100cm2, and the sampling Film thickness range is 0.01-1 mm.
The imported sliding track is used with the blade to cut multi-layer Cardboard samples, the sampling size error is +/- 0.5mm, the sampling thickness range is 18mm, the scale laser engraving is clear and wear-resistant, and the strong magnet is convenient for blade installation.
