Adopt D/8 lighting observation conditions, the measurement diaMeter is Φ 10mm, and the spectral reflectance Repeatability Standard Deviation is within 0.08%. It has camera framing and automatic Gloss compensation technology to ensure measurement accuracy.
Adopt arc reciprocating motion mode, provide four adjustable speeds (21-106rpm) and 2lb/4lb friction load, support 0-999999 automatic shutdown tests, suitable for Abrasion Resistance evaluation.
The large diaMeter design is used to facilitate sample pouring in and out, the inner wall arc transition is easy to clean, and the accuracy is controlled within 0.2% to ensure reliable measurement results.
Using aluminum alloy material, the accuracy is controlled within 0.2%, the inner wall arc transition is easy to clean, and the lid small hole design can overflow excess samples to avoid bubbles and improve the test accuracy.
Adopt mirror stainless steel argon arc welding box, Temperature range 10~ 200 ℃, Temperature Uniformity +/- 3%, equipped with microcomputer P.I.D temperature controller and hot air circulation system, can adjust the intake and exhaust volume.
Mirror stainless steel argon arc welding box, temperature control accuracy +/- 1.0 ℃, hot air circulation system to improve Temperature Uniformity, can adjust the air intake and exhaust volume, support multi-stage programmable control and independent temperature limit alarm.
Frequency 7MHz, Probe diaMeter 6mm, can be measured thin-walled and small arc surface, minimum pipe diaMeter Φ 15mm, Measurement range 0.75-80 mm, suitable for different environmental conditions.
Impact specimens with specified weight steel balls falling freely from a set height can evaluate the resistance to rapid deformation of materials or coatings, and are suitable for testing a variety of substrates.
The dual-station design can simultaneously carry out two sample tests, the friction speed is 30CPM, the friction hammer load is 200g, and it has the power-off memory function to support dry and wet friction and organic solvent friction test.
The mirror stainless steel argon arc welding box is used, the microcomputer P.I.D temperature controller has accurate temperature control, and the hot air circulation system improves the Temperature Uniformity. Temperature range RT + 10~ 200 ℃, volume 1000L.
With 0.01mg/m ³ detection sensitivity and +/- 2% repeatability error, it supports all-weather continuous multi-station monitoring, can automatically transfer data and realize remote query and management.
MCU chip to achieve low power consumption operation, equipped with intelligent Sensor to ensure detection accuracy ≤ +/- 3% F. S, Response Time ≤ 30S, support 4-20mA, RS485 and wireless signal output, can be operated by remote control without opening the lid, with local sound and light alarm and remote monitoring capabilities.
Using arc surface drying plate design, the maximum temperature can reach 180 ℃, Heating power 2500W, the steam is quickly discharged during the drying process, easy to operate and maintenance-free.
Temperature range RT + 10~ 300 ℃, Temperature Fluctuation +/- 1.0 ℃, using microcomputer P.I.D temperature controller, hot air circulation system to improve Temperature Uniformity, independent temperature limit alarm to ensure safety.
The accuracy is controlled within 0.2%, and the large diaMeter and arc inner wall design is adopted to facilitate sample pouring and cleaning. The small hole of the lid can overflow the excess sample to avoid bubbles and improve the test accuracy.
