The application width is more than 280mm, the thickness range of Spreader is 2um-1.1mm, and the manual drag is used to control the speed of Spreader to ensure the uniformity and accuracy of Spreader.
Using platinum plate or ring method measurement, the range is 0~ 400mN/m, the minimum resolution is 0.1mN/m, the manual lifting and lowering points are fast and micro-adjusted, and the output data of RS232C interface is supported.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
The equipment adopts international standards, the papermaking diaMeter is 300mm, the capacity is 8 liters, and it is equipped with manual pulp plate and optional vacuum papermaking function.
Side rocker lift design to ensure smooth operation, the lifting process can be retracted and continue; with 0.01mm height display indexing, accuracy of 0.05mm, no need for each boot zero, no conductive requirements for the test plate.
Measurement accuracy of 0.1mN/m using electromagnetic force equilibrating Sensor, support platinum plate method and platinum ring method dual method, automatic operation without manual calculation, real-time display Linear dispersion and save data.
Measuring methods of platinum plate and platinum ring are supported, with resolution up to 0.01mN/m, equipped with fast fine-tuning manual lifting platform, and can display data in real time through RS232 interface.
The manual lifting platform is equipped with fast fine-tuning dual gear, supports platinum plate method and ring method dual Measurement mode, Measurement range 0-400mN/m, error is only +/- 0.1mN/m, can be connected to the computer to display the tension change in real time Linear dispersion.
Using rigid polyester plate with foam rubber cushion, size 240x340mm, can absorb operating pressure, improve proofing Repeatability and uniformity, suitable for a variety of substrate testing.
The total film width of 90mm is divided into 10 gaps, the depth is gradually increased by 25μm, and the spacing is 1.5mm. The removable guide plate design is easy to operate on different thickness test panels.
Adopting manual sprocket drive structure, Working Travel ≥ 80mm, equipped with four weight combinations, accurate drawing is achieved through replaceable 808 stylus, and different diaMeter graphics are supported.
Visual aiming and manual measurement, measurement range up to +/- 180 °, equipped with LED Illuminant to extend the service life, support 100mm/200mm ordinary testtube.
Manual lifting design, Rotor speed 0.1-200/min stepless adjustable, built-in automatic temperature optimization program, up to 8 degrees/min, sample volume 10ml, repRoducibility +/- 1% F.S.
With manual and automatic temperature compensation function, Measurement range 2.00~ 4.40pHCO3, resolution 0.01pHCO3, support temperature compensation range 5.0~ 50.0 ℃, the instrument is light and beautiful.
Using manual temperature compensation and imported integrated components, Measurement accuracy up to 0.01pH, Stability zero drift ≤ 0.01pH/2h, Support three point calibrating and Data storage extraction function.
