Using brushless DC variable frequency motor, speed range 0-8000rpm, Processing capacity 0.2-5 L, with dispersion, grinding, stirring multi-function, closed work to reduce pollution, Modular design for easy maintenance.
Rotation speed of 8000rpm, line speed of 33m/s, can achieve efficient dispersion and refinement of grinding; double-decked chilled down jacket design, temperature rise is less than 10 ℃, to ensure material Stability; Modular structure is easy to disassemble and clean, support timing speed intelligent control.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Adopt spring electric lifting system, Travel 200mm; Frequency conversion motor Power 750W, speed range 60-8000rpm; with dispersed impeller and sand grinding blades, can be adapted to jacket chill down Mixing Tank for multi-purpose experimental operation.
Using 0-3000rpm stepless speed regulation, Processing capacity of 10-200L, with full explosion-proof safety design, hand lifting structure is easy to operate, suitable for high viscosity material dispersion mixing process.
The equipment uses a spring lift system, lift Travel 200mm, speed range of 60~ 8000rpm, can adapt to different experimental needs, through the digital PID technology implementation High Accuracy control, and provide dispersed impeller and sand grinding disc.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
The multi-function integrated design realizes the dispersed and integrated operation of the mixing sand mill, 750W Power with 0-2800rpm wide range speed regulation, and the dual-axis constant force lifting system ensures stable operation.
The equipment set stirring, sand grinding, dispersing functions in one, using Minbu motor to achieve 0-2800rpm speed regulation, lift Travel 250mm, with small size, low noise and no carbon brush abrasion characteristics.
The equipment adopts an electric lifting platform and variable frequency speed regulation, with a maximum Vacuum Level of -0.095Mpa to ensure efficient mixing of materials in a vacuum environment; the core component is SUS304 stainless steel, which is durable and easy to clean, and the compact design is suitable for a variety of application scenarios.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
High-performance motor running smooth and low noise, with CPU digital display dynamic Rotation speed control, can realize timing fixed speed operation, Processing capacity 10-100L, lifting Travel 600mm, support a variety of mixing forms simple replacement.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
