Adopting dip coating with double roll extrusion structure, Spreader thickness 0.3-10 mm adjustable, mechanical speed 1.2m/min can be slowly adjusted, built-in glue circulation system to ensure Spreader uniformity.
Adopting double roll extrusion method, Spreader Film thickness range 0.3-10 mm adjustable, accuracy up to +/- 0.05mm, equipped with handwheel adjustment and dial indicator display, dip plate is 304 stainless steel material.
The extrusion process achieves a coating precision of 0.1 microns, with a wet film thickness of 112.0 μm. The stainless steel material ensures durability, making it particularly suitable for handling high-viscosity samples without clogging issues.
The extrusion process ensures that the bar is unbroken and easy to clean, the film thickness is 45μm, the total length is 250mm, and the 304 stainless steel material is durable and reliable.
Using extrusion molding process, film thickness 105 microns, application width 250mm, diaMeter 10mm, 304 stainless steel material to ensure durability and accurate Spreader effect.
The extrusion molding process is used to ensure continuous wire, the film thickness is precisely controlled by 20μm, the application width is 250mm to meet various needs, and the 304 stainless steel material is durable and easy to clean.
Using dip coating process with double roll extrusion residual material, Spreader thickness adjustable, mechanical speed 0.1-1 m/min, Oven temperature 50-150 ℃ +/- 3 ℃, suitable for a variety of Coating Spreader.
Hydraulic drive provides a range of 1-20kN force values, accuracy of 0.1N, extrusion Travel 200mm or 300mm, equipped with standard extrusion head and pressure relief device to ensure safe and stable testing.
Employing an extrusion production process, the coating thickness is 105 microns, the coating width reaches 300 mm, and the coating accuracy can achieve 0.5 microns, ensuring coating uniformity and high-precision control.
The extrusion process ensures no broken wire, the film thickness is 110 microns, the application width is 300 mm, and the stainless steel material is durable and easy to clean, suitable for precision Spreader applications.
Using the immersion coating method, Spreader thickness 0.3-10 mm adjustable, mechanical speed 1.2m/min, built-in glue circulation system to ensure uniform and stable Spreader.
Driven by hydraulic cylinder, the extrusion pressure range is 1-20kN, and the aCupuncture speed is adjustable by 10-80mm/s; the rear side of the box is equipped with an exhaust trend and pressure relief device to ensure the safety and control of the test process.
Adapted diaMeter 16mm formed Metering Rod, the total length of 2000mm, through the special structure to correct the straightness of the Rod body, to ensure stable rotation and full contact with the substrate, improve the thickness control accuracy of Spreader.
Adopt double roll extrusion method to achieve 0.3-10 mm Spreader Film thickness, accuracy of +/- 0.05mm; Equipped with hot air circulation Oven, Temperature range room temperature to 200 ℃ +/- 3 ℃; Tension controller automatically controls the unwinding process to ensure the uniformity of Spreader.
The cold extrusion process is used to form a continuous groove to control the wet film thickness, the wet film thickness is 5 μm, the material is 304 stainless steel, and the workmanship is fine and environmentally friendly. Encasement.
