Using 160 line metal anilox roller and rubber roller combination, print width 70mm, suitable for inks proofing, wet film thickness and the number of lines inversely proportional, proofing authenticity and easy to operate.
Uniform Spreader with dual roller structure, 160 lines/inch anilox roller precisely controls film fineness, metal plating anilox roller ensures durability and supports multi-material Spreader testing.
Using 200LPI anilox roller and 70mm print width, metal anilox roller and rubber roller combination, the handle is made of stainless steel, suitable for a variety of inks Spreader and good sample repRoducibility.
Adopt horizontal three-roller extrusion grinding, roller clearance hand adjustment, maximum processing viscosity 3000000cps, roller can be cooled down water temperature control, fineness control precision, suitable for a variety of viscosity materials.
The metal plating anilox roller with 120 lines/inch quadrilateral pyramid mesh hole is used to achieve uniform Spreader with rubber roller, and the print width is 70mm, which is suitable for film effect testing of various liquid materials.
Roller diaMeter 65mm, processing capacity 0.5-10 kg/h, support chill down water temperature control, emergency brake protection, can be customized ceramic roller material, to adapt to viscosity ≤ 3,000,000cps material.
Using 140 wire metal anilox roller to control ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and high repRoducibility.
Three rollers are used to crush each other to destroy the molecular binding force, and the material is crushed and mixed. The size of the roller is 65x135mm, the rotation speed of the middle roller is 88rpm, and the particle size of the starting material is 50~ 100μm.
Using 100 wire metal anilox roller to control ink film thickness, it can quickly prepare flexographic samples, easy to operate and clean, and good repRoducibility.
Equipped with 140lpi, 180lpi, 200lpi anilox roller and metal engraving roller to control ink film thickness, can quickly pRoduce flexographic samples, easy to use and clean, good repRoducibility.
Using 400 wire metal anilox roller to control the ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and the repRoducibility is very similar to that of conventional flexographic printing.
Using 0.06mm ultra-fine steel wire, thinner than 0.07mm common in the market, the bristles are soft and do not hurt the roller surface; handmade to ensure mass, four lines of 62-hole design to improve cleaning efficiency, wooden base operation is stable.
Using 500 wire stainless steel anilox roller and quadrilateral pyramid mesh hole, the thickness of INKS film can be precisely controlled, flexographic samples can be quickly prepared, and cleaning and maintenance are convenient.
Ceramic roller structure, line number standard 600LPI can be customized 70-1200 lines, BCM range 1.6-5; drawdown blade, ceramic roller and other components can be individually adjusted left and right pressure, proofing speed 0-80 m/min adjustable, support material thickness 0.01-2 mm.
The three-roll extrusion grinding principle is used to process materials with a viscosity of up to 3 million cps. The roller can control the temperature rise through chilled down water. The roller speed range is 23-178rpm. It supports the customization of ceramic materials such as zirconia and is suitable for paste grinding with high fineness requirements.
