Featuring a stainless steel frame suitable for dry, wet, and manual sieving, with a pore size of 250μm, laser engraving provides clear labeling to ensure full traceability.
Measurement range 0.5-3000 μm, maximum resolution 0.1μm, support more than 30 image analysis functions, Particle size distribution and morphology analysis.
The stainless steel frame is suitable for wet and dry screening, laser engraving ensures clear traceability, and the aperture of 100μm meets the needs of fine grading.
Using laser scattering technology, a single measurement can simultaneously display up to five particle size particulate matter (PM) concentrations, Sensitivity of 0.001 mg/m ³, no need to replace the cutting head, support continuous monitoring and Data storage functions.
Featuring a stainless steel frame, suitable for dry, wet, and manual sieving, with a 500 μm aperture, laser-engraved labels provide clear identification and full traceability.
Using laser scattering technology, one measurement simultaneously displays five particle size data, detection range 0.01-100 mg/m ³, Sensitivity up to 0.01mg/m ³, no need to replace the cutting head, support continuous monitoring and Data storage functions.
Adopting stainless steel frame, suitable for dry, wet and manual screening, with a aperture of 150 μm, laser engraved labels ensure clear traceability and meet ISO standards.
With six-channel particle size detection and 2.83L/min Sampling flow rate, using laser Illuminant life of over 30,000 hours, support UCL calculation and Built-in Printer, AC-DC dual-use can work continuously for more than 6 hours.
With six-channel particle size detection capability, Sampling flow rate 2.83L/min, using long-life laser Illuminant to ensure Stability, built-in thermal printer and support AC and DC power supply, can work continuously for more than 6 hours.
Test range 0.5~ 3000μm, Maximum magnification 4000 times, can analyze the number of particles, area, circumference, diaMeter, aspect ratio and other distribution data, support a variety of formats of test report output.
Modular stainless steel vacuum circuit design ensures high Vacuum Level, metal dewar bottle to maintain constant liquid nitrogen temperature. Equipped with High Accuracy Sensor and 22-bit AD converter, aperture analytical range 3.5 to 5000 Angstroms, support DFT and MC theoretical model calculations.
With two movements of reciprocating and top-beating vibration, the screening efficiency is high and does not block the screen surface. It can be adapted to a set of screening screens of Φ 200, Φ 75, and Φ 100. The number of swirl/spins is 290 +/- 6 times/minute, and the number of beats is 156 +/- 3 times.
Using laser scattering technology, the detection sensitivity is 0.01mg/m ³, the Measurement range is 0.01~ 100 mg/m ³, with self-cleaning and clean gas Shielding functions, and supports a variety of cutters and timing sampling modes.
Using laser scattering technology, Sensitivity up to 0.001mg/m ³, Measurement range 0.001~ 10mg/m ³, with self-cleaning and filter sampling functions, support a variety of cutter options, to achieve rapid continuous monitoring.
Laser Sensor is used to directly measure the natural vibration Frequency of the belt. Measurement range is 10Hz~ 800Hz. The size of the split Probe is only 124 * 21 * 12mm. It can penetrate into a small space of 66mm and supports metric and imperial Unit switching.
