Measurement range covers 0~ 5mg/L residual chlorine total chlorine and 0~ 10mg/L chlorine dioxide, support 100 measurements, suitable for water quality testing, easy and fast operation.
Simultaneous measurement of residual chlorine, chlorine dioxide, total chlorine and other five paraMeters, resolution of 0.001mg/L, Repeatability 2%, micro-processing technology and high Reliability integrated circuit to ensure long-term stable work.
Using micro-processing technology and high Reliability integrated circuit, with data nonlinear processing and smoothing function, fast automatic multi-point correction, Measurement range residual chlorine 0~ 2.5mg/L, chlorine dioxide 0~ 5.0mg/L, Repeatability 2%, to ensure long-term stable work.
Measurement range 0~ 5mg/L, support residual chlorine and chlorine dioxide dual paraMeter detection, a single package can complete 100 measurements, supporting special instruments to use convenient and fast.
Measurement range 0.00-2 mg/L, accuracy +/- 0.10 mg/L +/- 5%, LED Illuminant and unique reference Detector ensure fast and stable readings, support GLP function.
Using industrial grade Sensor, Response Time T90 is less than 60 seconds, with waterproof, dustproof and explosion-proof function, the shell is made of high-strength engineering plastic and non-slip rubber to ensure stable operation in harsh environments.
It can simultaneously detect 9 paraMeters such as residual chlorine, chlorine dioxide, ammonia nitrogen, etc., with a resolution of 0.001mg/L. It adopts high-intensity long-life Illuminant and micro-processing technology to ensure long-term stable operation.
Measurement range 0.00-2 mg/L, accuracy +/- 0.01mg/L +/- 5%, LED Illuminant and unique reference Detector ensure fast and stable measurement, CAL Check function supports performance verification.
The MCU chip is used to achieve low-power Modular design, supporting 4-20mA, RS485 and switching output, Response Time ≤ 30 seconds, detection error ≤ +/- 3% F. S, with explosion-proof structure and remote control operation function.
8Nm Narrowband Interference filter and LED Illuminant, wavelength accuracy +/- 1nm, support residual chlorine and total chlorine 0.00-5 mg/L Measurement range, built-in reaction Timer and 50 sets of Data storage, with IP67 waterproof performance.
Simultaneous measurement of turbidity, residual chlorine and total chlorine with EPA custom Illuminant, USEPA 180.1 compliant, automatic range conversion, turbidity Measurement range from 0.00 to 4000 NTU, support for multi-unit display and GLP data management.
Using industrial grade Sensor to detect nitrogen dioxide gas, range 0~ 20ppm, resolution 0.1ppm, Response Time T90 < 60s, with waterproof, dustproof and explosion-proof characteristics, small and durable.
Using BNC connector design, equipped with 60mL calibrated solution and residual chlorine regulator, replaceable membrane to extend service life, suitable for water quality monitoring.
Designed for residual chlorine ElectRode Reagent, 250ml size, provides stable ionic strength adjustment to ensure fast and accurate ElectRode Response in the measurement process, suitable for various water quality testing environments.
Designed with flameproof and explosion-proof structure, Response Time is less than 30 seconds, accuracy +/- 3% FS, can detect 0-20ppm sulfur dioxide concentration, support 4-20mA and RS485 signal output, suitable for harsh industrial environments.
