150W Philips infrared lamp, peak wavelength 950nm, temperature measurement accuracy +/- 0.5 ° C, insulation accuracy +/- 2%, can quickly compare the insulation performance of different materials, the test time is only 1 minute.
The use of high temperature resistant fiberglass insulation material wOven into a hemispherical internal thermal structure, the heating area is large and the temperature rises rapidly, and the thermal insulation effect is excellent; no open flame design avoids bruising Glass ware, the maximum operating temperature is 380 ° C, and the power is 1500W to support continuous work.
The use of high temperature resistant fiberglass insulation material wOven into a hemispherical internal heating heater, the highest temperature of 380 ℃, heating area and rapid heating, excellent insulation effect, to avoid the risk of open flames.
150W Philips infrared lamp, double lamp temperature non-uniformity of 2C °, unilateral temperature Measurement accuracy +/- 0.5 ° C, can compare the heat insulation effect of two materials at the same time and display the temperature difference in real time.
Using oil Bath heating medium, Temperature range from room temperature to 200 ℃, temperature control accuracy +/- 0.5 ℃, equipped with sample clamping grid to ensure temperature stability, suitable for various film thermal cissing rate tests.
Measurement range 0-40000W/m ², Light spectrum Response 1000-1700nm, can automatically calculate and display infrared barrier rate, photosensitive aperture 10mm, suitable for performance testing of various Infrared sources and thermal insulation materials.
Adopting high temperature resistant fiberglass insulation layer sealing resistance wire, the heating area is large and the heating is fast, the maximum operating temperature is 380 ° C and supports continuous work.
Using high temperature non-alkali fiberglass insulation material, resistance wire sealing in the insulating layer, large heating area, fast heating, good thermal insulation effect, the highest temperature 380 ℃, power 4000W, no open flame design, not easy to bruise Glass ware.
Adopt high temperature resistant non-alkali fiberglass insulation layer sealing resistance wire, heating area is large and heating up fast, the maximum temperature of 380 ℃, support continuous Operating Mode, no open flame design to avoid Glass ware bruises.
The transient planar heat source method is used, the test time is not more than 160 seconds, the Sensitivity is 0.00001, and the thermal conductivity of 0.0001 to 50W/(m * K) can be measured. It supports a variety of morphological samples and meets international standards.
Four-channel K-type Thermocouple configuration, accuracy of 0.5%, insulation performance maintained at 400 ℃ for 60 minutes, support multi-rate sampling and data synchronization analysis, to ensure stable and reliable temperature mapping.
Using high temperature non-alkali fiberglass insulation material, the highest temperature 380 ℃, with internal and external dual Sensor temperature measurement function, large heating area and rapid heating, excellent thermal insulation effect.
Using two-box mobile Impact structure, Thermal Shock mechanism moves within 10 seconds, temperature recovery time ≤ 5 minutes, equipped with rigid polyurethane foam insulation material, effective energy saving and waterproof and moisture proof.
Support thermal deformation and Vicat softening point test, Temperature range up to 300 ℃, Temperature control accuracy +/- 0.5 ℃, mechanical mixing and large capacity Tank to ensure uniform insulation field, double control mode operation flexibility.
With 260 * 200 thermal imagery resolution and 70mK thermal Sensitivity, it can quickly locate the abnormal temperature rise point of the circuit board, support -10~ 120 ℃ temperature measurement range, equipped with adjustable lens and multi-directional adjustment bracket, easy to accurately observe the thermal distribution of the circuit board.
