Equipped with 10-station synchronous test capability, 1000g weight and 1-999999 minute Timer, using SUS #304 steel plate to ensure test accuracy, and automatically recording tape peeling time.
Using 2000g +/- 5g roller load and 300mm/min rolling speed to ensure that the adhesive tape sample is flat and evenly adhered to the standard substrate, in line with CNS-11888 and PSTC-8 design standards.
The adhesive force of the tape is 4.3N/cm, and the principle of cross-cut method is adopted, which is suitable for adhesion testing. The performance is stable and non-degumming, and the test results are accurate and reliable.
Precision ball screw drive and double rail design, Force Measurement range 0.03-200 N, Accuracy grade 0.5, support a variety of unit selection and intelligent calculation test results, equipped with micro printer and overload protection function.
11/16 inch standard width paper tape, capable of completing approximately 1800 cycles of testing per roll, must be stored at 23 +/- 2 ° C and 50 +/- 10% Humidity to ensure Stability.
Adopt replica tape method to measure surface roughness, Peak Measurement range 20~ 115μm, accuracy +/- 5μm, with automatic subtracting substrate function, High Protection Rating, anti-solvent and water dust.
It is suitable for a variety of mechanical property tests such as tension, compression, bending, shear, tearing, peeling, and puncture. It supports multiple control modes including constant speed, fixed displacement, and constant force, enabling complex multi-step nested loop control, and features powerful data and curve analysis capabilities.
Measured value 500N, suitable for tape, PCB, adhesive tape and other materials disbonding force test, supporting the Force Gauge test bench.
Maximum compressire strength 50KN, platen size 1200 * 1200mm, with three test modes of compressire strength, stacking strength and fixed distance, support 7-inch Touchscreen operation and thermal printing function.
Measurement range 0-3000N, accuracy up to +/- 1% of the reading, equipped with 7-inch screen display test Linear dispersion, with automatic conversion of edge pressure strength, ring pressure strength and other functions, support data statistics and micro printing.
Measured value 500N, suitable for tape, leather, clothing, rubber, electrical components, paper and other materials, assist Force Gauge in tensile testing to ensure test Stability and accuracy.
Tack is good and non-degumming, adhesion reaches 7.6 N/cm, mass performance is stable, suitable for cross-cut adhesion testing, to ensure accurate film integrity assessment.
Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
Precision ball screw drive system, Force Measurement range 0.005-30N, Accuracy grade 0.5, equipped with 5-inch high definition Touchscreen and intelligent operation function, support a variety of unit selection and USB data export.
Full digital control AC motor, speed accuracy of 0.5%; aluminum extrusion sealing plate built-in double roller screw, improve load efficiency; support upper and lower limits and overload protection, stable and reliable test.
